BGL HE/HS2304 adapter sleeve

BGL HE/HS2304 is a reference of adapter sleeve, within Bushings and sleeves. Request a quote for HE/HS2304 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The BGL HE/HS adapter sleeve is a component that allows tapered bore bearings to be mounted on plain shafts, without the need for a shoulder or special machining. It is supplied complete with sleeve, lock nut and lock washer or MS lock, which simplifies mounting and ensures reliable axial fastening. It is a common solution in equipment where the bearing must be perfectly centered and secured, with the possibility of adjusting internal clearance using the nut.

The HE/HS… designation is read according to the shaft diameter and the series type. Examples HE/HS204, HE/HS207 and HE/HS212 correspond to bearings with 20, 35 and 60 mm bores of the 2xx series, while HE/HS304, HE/HS307 and HE/HS312 correspond to bearings of the 3xx series with those same bores. The HE/HS2304 and HE/HS2307 series is used on tapered bore bearings with specific dimensions. The numeric suffix indicates the shaft size and the compatible bearing; to select the correct one, it is essential to know the shaft diameter and the code of the bearing to be mounted.

These sleeves are used in a wide variety of industries in Argentina, such as food, chemical, cement and metallurgical. They are common in conveyors, pumps, fans, mixers and power transmission equipment. Their ability to secure bearings on plain shafts makes them ideal for assemblies where no shoulder is available or where the axial position of the bearing needs to be adjusted. They are also used in applications with moderate loads and medium speeds, provided the recommended shaft tolerances are respected.

For correct selection, take into account the shaft diameter (maximum tolerance h10), the type of tapered bore bearing and the operating conditions. The sleeve is supplied with lock nut and lock washer, which facilitates adjustment of the bearing's internal clearance. During mounting, make sure to clean the surfaces, apply the appropriate lubricant and tighten the nut with the proper tool until the desired clearance is obtained. Alignment between shaft and housing is critical to avoid additional stresses and extend the service life of the assembly.

As for equivalents and interchangeability, BGL HE/HS adapter sleeves are compatible with tapered bore bearings from different brands that use the same fastening system. If the customer brings a code from another brand or an unidentified part, we can quote the equivalent sleeve. Interchangeability is determined by the shaft and bearing dimensions, so it is important to verify the complete designation. To do this, you can send us the bearing code or the shaft dimensions and we will indicate the exact reference.

At MR Accesorios Industriales we sell BGL HE/HS adapter sleeves with the quality and backing that characterises us. If you need a quote for a sleeve for your application, write to us on WhatsApp with the code or the shaft dimensions and we will reply shortly. We can also advise you on selection and mounting so that your equipment runs without issues.