Adapter sleeve BGL HE/HS212

BGL HE/HS212 is a adapter sleeve reference, within Bushings and sleeves. Request a quote for HE/HS212 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The BGL HE/HS adapter sleeve is a component that allows tapered bore bearings to be mounted on plain shafts, with no need for a shoulder or special machining. It is supplied complete with sleeve, lock nut and lock washer or MS lock, which simplifies mounting and ensures reliable axial fixing. It is a common solution in equipment where the bearing must be perfectly centered and secured, with the ability to adjust internal clearance using the lock nut.

The HE/HS designation… is read according to the shaft diameter and the series type. Examples HE/HS204, HE/HS207 and HE/HS212 correspond to sleeves for smaller diameter shafts, while HE/HS304, HE/HS307 and HE/HS312 cover larger applications. The HE/HS2304 and HE/HS2307 series is used on tapered bore bearings with specific dimensions. The numeric suffix indicates the shaft size and the compatible bearing; to select the right one, it is essential to know the shaft diameter and the part number of the bearing to be mounted.

These sleeves are used in a wide variety of industries in Argentina, such as food, chemical, cement and metallurgical. They are common in conveyors, pumps, fans, mixers and power transmission equipment. Their ability to secure bearings on plain shafts makes them ideal for assemblies where no shoulder is available or where the axial position of the bearing needs to be adjusted. They are also used in applications with moderate loads and medium speeds, provided the recommended shaft tolerances are respected.

For correct selection, take into account the shaft diameter (maximum tolerance h10), the tapered bore bearing type and the operating conditions. The sleeve is supplied with lock nut and lock washer, which makes it easy to adjust the bearing's internal clearance. During mounting, make sure to clean the surfaces, apply the appropriate lubricant and tighten the lock nut with the proper tool until the desired clearance is obtained. Alignment between shaft and housing is critical to avoid additional stresses and extend the service life of the assembly.

As for equivalences and interchangeability, BGL HE/HS adapter sleeves are compatible with tapered bore bearings from different brands that use the same fixing system. If the customer brings a part number from another brand or an unidentified part, we can quote the equivalent sleeve. Interchangeability is determined by the shaft and bearing dimensions, so it is important to verify the complete designation. To do this, you can send us the bearing part number or the shaft measurements and we will tell you the exact reference.

At MR Accesorios Industriales we sell BGL HE/HS adapter sleeves with the quality and backing of more than 80 years in the market. If you need a quote for a sleeve for your application, write to us on WhatsApp with the part number or the shaft measurements and we will reply shortly. We can also advise you on selection and mounting so that your equipment runs without issues.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.