BGL AHX3296GG withdrawal sleeve

BGL AHX3296GG is a reference of withdrawal sleeve, within Bushings and sleeves. Request a quote for AHX3296GG via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The BGL AHX series withdrawal sleeve is a fastening component for tapered bore bearings. It is placed on the shaft with a support shoulder and pushed into the bearing bore by means of a nut threaded on the shaft or an end cap. Its external thread allows the assembly to be dismounted without damaging the bearing. Made of nodular cast iron, with a carbon steel option, it is a robust solution for power transmission.

The AHX series designation combines letters and numbers that indicate the size and type of sleeve. For example, AHX30/500GG and AHX31/500GG correspond to bearings with a bore of 500 mm, while AHX32/600GG corresponds to bearings with a bore of 600 mm. Part numbers such as AHX3088GG, AHX3092GG, AHX3096GG and AHX3188GG follow the same logic: the larger number refers to specific dimensions of the series. The GG suffix indicates the constructional configuration of the sleeve. To identify the exact part, send the complete part number shown on the drawing or on the equipment nameplate.

These sleeves are used in applications where the bearing must be firmly secured on a tapered shaft with a shoulder. They are common in gearboxes, mills, conveyor belts, pumps and equipment in mining, cement and steelmaking. In Argentina, the food, oil and power generation sectors also use them for mountings that require later dismounting without damaging the bearing or the shaft. Nodular cast iron provides wear and fatigue resistance, suitable for moderate and high loads.

To select the correct sleeve, take into account the shaft diameter, the tapered bore of the bearing and the support shoulder. The lock nut, the lock washer and the withdrawal nut are ordered separately, as they are not included. During mounting, check the alignment of the assembly and apply the recommended lubrication to facilitate the fit. The sleeve thread allows controlled dismounting: when the withdrawal nut is turned, the bearing is released without excessive force.

As for equivalents, withdrawal sleeves are identified by their standardized designation, which may vary between manufacturers. If you have a part number from another brand or an unidentified part, write to us on WhatsApp and we will indicate the compatible alternative with the same functional dimensions. MR Accesorios Industriales sells the BGL line as exclusive representative in Argentina.

To request a quote for your BGL AHX series withdrawal sleeve, send the complete part number by WhatsApp to MR Accesorios Industriales. We reply promptly with availability and commercial terms. If you need several units or a special size, you can also consult us and we will advise you so you choose the option suited to your application.