Withdrawal sleeve BGL AHX2310

BGL AHX2310 is a withdrawal sleeve reference, within Bushings and sleeves. Request a quote for AHX2310 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The BGL withdrawal sleeve of the AHX line is a mounting component for tapered bore bearings. It is placed on the shaft with a support shoulder and pushed into the bearing bore by means of a nut threaded on the shaft or a cover at its end. Its external thread allows the assembly to be dismounted without damaging the bearing. Made of BGL nodular cast iron, with a carbon steel option.

The designation of these sleeves is read by series and size: AHX30 and AHX31 are the two variants BGL offers, and the number that follows indicates the shaft diameter for which they are intended. For example, AHX30/500 corresponds to a 500 mm shaft, AHX31/600 to a 600 mm one, and so on with the rest of the sizes. The AHX30 and AHX31 series share the mounting concept, but differ in dimensions and load capacity depending on the bearing to be secured.

These sleeves are used in equipment where tapered bore bearings must be firmly secured on shouldered shafts: gearboxes, mills, conveyor belts, pumps, fans and heavy machinery in general. In Argentina, the sectors that demand them most are mining, cement, steel and the food industry, where equipment works with high loads and requires safe, removable mounting.

To select the correct sleeve, take into account the shaft diameter, the type and size of the bearing, and the available securing method (nut on the shaft or cover at the end). During mounting, check that the support shoulder is clean and free of burrs, and that the sleeve thread is lubricated to facilitate the fit. The lock nut, lock washer and withdrawal nut are ordered separately, so define whether you need them before requesting a quote.

As for equivalents, withdrawal sleeves are identified by series and shaft size, and different brands may use similar nomenclature. If you have a code from another brand or an unidentified part, send us the data and we will tell you the compatible alternative. MR Accesorios Industriales sells the BGL line as exclusive representative in Argentina, with more than 80 years of experience in the field.

To request a quote for the sleeve you need, send us the complete code on WhatsApp, for example AHX30/560 or AHX31/710. You can also ask us about the corresponding lock nut, lock washer or withdrawal nut. At MR Accesorios Industriales we reply promptly with the information you need for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.