Brand we market
In TIMKEN withdrawal sleeve arrangements, the part between shaft and bearing belongs to the seat, rather than being a separate tool. Its geometry and position support installation and removal according to the assembly design. This line differs from adapter and hydraulic sleeves despite similar designation groups. “Withdrawal” alone does not define the replacement: bearing reference, shaft and axial retention are also needed.
See all TIMKEN bushings and sleeves references →TIMKEN guide →Withdrawal sleeves from all brands →TIMKEN adapter sleeves →TIMKEN lock nuts →
AHX310, AH32/750 and AOH30/530 show connected AHX numbers and AH or AOH groups with a slash. Do not introduce spaces to resemble another brand. Recorded shaft dimensions are 710 mm for AH32/750 and 500 mm for AOH30/530. Their difference from visible code numbers shows why the portion after the slash cannot automatically be read as shaft diameter. Dimensions belong to the individual reference.
At an industrial roller support, access to the sleeve end depends on shoulders, nuts and neighboring components. Trace the order from shaft to tapered bearing bore and identify retention. Show any drive obstructing access in the sketch. The intended removal method belongs to assembly maintenance; a front photograph or similar sleeve length cannot establish it.
For MR Accesorios Industriales, collect full code, quantity, associated bearing and verified shaft and seat dimensions. A side view identifies retained parts. List removal accessories separately. State whether measurements come from the machine or drawing and mark missing data. This defines a component without assuming all nuts are included or another series preserves the mounting.
Do not assume so; check the reference's dimension attribute.
List every required part to define scope.
Compare the mounting arrangement before substitution.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
The TIMKEN AOH series withdrawal sleeve is a mounting and dismounting component for spherical roller bearings with tapered bore. It is placed on the shaft or bearing taper and allows the part to be removed without damaging the inner ring or the seat. MR Accesorios Industriales supplies this line for plants that need clean and repeatable interventions.
The TIMKEN withdrawal sleeve is a mounting and dismounting component for bearings with a tapered bore. It is used together with a withdrawal nut to make installing and removing the bearing easier without damaging the shaft or the bearing itself. MR Accesorios Industriales sells this line for industrial applications that require efficient and reliable maintenance.
The TIMKEN withdrawal sleeve is a mounting and dismounting component for spherical roller bearings with tapered bore. It is placed on the shaft and allows the bearing to be removed without damaging the inner ring or the seat. MR Accesorios Industriales sells this line for plants that need clean and repeatable interventions on critical equipment.
Some codes:AOH32/530GAOH32/600GAOH32/630GAOH32/670GAOH32/710G
Just the manufacturer part number is enough: we will quote it and provide dimensions and equivalents via WhatsApp or email.
