Brand we market
An NSK angle ring is an accessory for specific cylindrical roller bearing arrangements. Identification involves the bearing and faces limiting axial movement. It is neither an additional bearing nor a needle bearing inner ring. Despite sharing the word ring, this line has an angular profile and a particular assembly function. Start by identifying the installed component and its bearing position.
See all NSK bearings references →NSK guide →Angular rings for cylindrical rollers from all brands →NSK needle roller bearings →NSK tapered roller bearings →
HJ 204, HJ 204 E and HJ 205 E all begin with HJ and a space; some add E after the numbers. Base 204 exists with and without that ending, so omitting it removes a catalog distinction. Do not assign E a general meaning borrowed from another family. Copy the complete designation and verify its bearing combination. Similar bearing numbers support investigation but do not prove compatibility.
In a transmission, an angle ring may sit beside a cylindrical bearing ring and shaft shoulder. Identify contact faces and the movement constrained by the arrangement. The machine drawing should show axial location, particularly when the other shaft end has a different role. Keep the removed ring identified with its bearing and record orientation. Its lateral position does not make it merely a spacer washer.
Give MR Accesorios Industriales the complete HJ code, quantity and associated bearing reference. Photograph the angular profile, markings and component order. Without markings, sketch bore, outside diameter and profile heights separately. This context identifies a component without assuming compatible combinations from matching numbers or describing it as a bearing assembly. List other replacement parts separately.
No, it is an angle ring for a compatible arrangement.
They are different references; verify the original ending.
Add bearing code and mounting arrangement.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
The NSK HJ E angular ring is an auxiliary component for cylindrical roller bearings. It is mounted on the inner ring and acts as an axial stop for the rollers, which allows the bearing to support axial loads in one direction. It is used in gearboxes, pumps, machine tools and industrial equipment where the shaft needs to be guided axially. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.
The HJ angle ring is an auxiliary component mounted on cylindrical roller bearings to guide the rollers axially and facilitate disassembly. It is used in equipment where there are moderate axial loads and a reliable assembly reference is needed. MR Accesorios Industriales sells the NSK line with the HJ designation, and quotes the exact code you need via WhatsApp.
Just the manufacturer part number is enough: we will quote it and provide dimensions and equivalents via WhatsApp or email.
