LINK-BELT Bearings

The LINK-BELT ER series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split or pillow block housings. It is used in equipment requiring smooth rotation and rigid support, such as conveyors, fans and agricultural machinery. MR Accesorios Industriales supplies this line backed by more than 80 years in the Argentine industrial market.

The ER series designation is read with the ER prefix followed by a number indicating the bore diameter. For example, ER8, ER10, ER12, ER14, ER15, ER16, ER18 and ER19 cover different sizes. The number is not the diameter in millimeters, but a reference that correlates with the size. To identify the exact size, it is always advisable to consult the manufacturer's table or send us the full part number.

These insert bearings are used in belt conveyors, bucket elevators, mixers, mills, fans and process equipment in the food, chemical, cement and agricultural industries. In Argentina, they are common in grain storage plants, meatpacking plants and animal feed factories. Their design allows them to be mounted in split housings, which makes maintenance and replacement easier without dismantling entire shafts.

To select the correct bearing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Sealing is key: in dusty or humid environments, choose versions with lip or double-lip seals. Proper lubrication and precise housing alignment extend service life. During installation, check that the outer ring seats correctly and that the shaft locking system is secure.

As for equivalents, LINK-BELT ER series insert bearings can be interchanged with other brands that follow the same dimensional standard. Always verify the tolerances and the locking type (set screw, eccentric, etc.) before replacing. MR Accesorios Industriales supplies LINK-BELT as a brand, and can advise you on the compatible alternative for your equipment.

If you need a quote for a LINK-BELT ER series insert bearing, write to us on WhatsApp with the part number or the shaft measurements. At MR Accesorios Industriales we will provide the quote shortly and indicate the best option for your application.

The LINK-BELT ER KCL series insert bearing is a ball bearing with an extended inner ring and Centrik-Lok locking system, designed to be mounted in split plummer block or pillow block housings. It is used in equipment where the shaft rotates and needs firm, repeatable securing, such as conveyors, fans and process machinery. Its design allows mounting and dismounting without damaging the shaft, which simplifies plant maintenance.

The designation of the ER KCL series reads as follows: the letters ER identify the family of inserts with extended inner ring; the number that follows — for example, in ER8KCL, ER10KCL or ER12KCL — indicates the nominal shaft diameter for which the insert is intended. The suffix K corresponds to the locking configuration, and CL indicates the Centrik-Lok system, which secures the inner ring to the shaft by means of an eccentric collar. The examples ER14KCL, ER15KCL, ER16KCL, ER18KCL and ER19KCL show how the number changes according to the shaft size.

These insert bearings are used in a wide variety of industrial equipment in Argentina: belt and chain conveyors, bucket elevators, mixers, centrifugal fans, mills, screens and machines for the food, cement, mining and chemical process industries. They are also found in material handling equipment and packaging lines, where ease of mounting and resistance to contamination are key factors.

To select the correct insert, take into account the shaft diameter, the type of load — radial, axial or combined — and the environmental conditions. The Centrik-Lok series facilitates locking without set screws on the shaft, which reduces the risk of marks and allows position correction. It is important to verify alignment between housings and control internal clearance; adequate lubrication and correct sealing extend service life, especially in dusty or humid environments.

LINK-BELT ER KCL series insert bearings are interchangeable with other brands that offer similar locking systems, such as eccentric collar or set screw types. When requesting a quote, it is advisable to indicate the complete part number and working conditions to ensure dimensional and functional compatibility. MR Accesorios Industriales carries this line as a brand and can advise you on the right alternative for your equipment.

If you need an ER KCL series insert bearing, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we quote it promptly and, if necessary, indicate the equivalent option that best suits your application. With more than 80 years in the industrial market, we support workshops, factories and maintenance with products and technical advice.

The LINK-BELT ER-K series insert bearing is a single row ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or floor mounted units. It is used in equipment where the shaft rotates on supports that must be aligned and lubricated frequently. MR Accesorios Industriales carries this line and helps you choose the correct part number according to the shaft diameter and the type of housing.

The ER-K series designation is read step by step: the letters ER identify the family of insert bearings with an extended inner ring, and the number that follows indicates the nominal shaft diameter in inches (ER8K, ER10K, ER12K, ER14K, ER15K, ER16K, ER18K, ER19K). The K suffix distinguishes this variant within the series. To order the replacement, it is enough to provide the complete part number shown on the housing or on the old bearing.

These inserts are found in belt conveyors, bucket elevators, mixers, mills, screens and process equipment in food, chemical and aggregate plants. In Argentina they are common in packaging lines, waste treatment plants and material handling systems where maintenance is done with the equipment stopped. They also appear in fans and medium-sized centrifugal pumps.

To select the right insert, take into account the shaft diameter and the type of housing where it will be seated. The extended inner ring allows the bearing to be secured to the shaft with set screws or with a collar, depending on the housing design. Check the sealing: contact seals protect against dust and moisture, but in very dirty environments additional protection is advisable. Lubrication with good quality grease and careful alignment of the housing extend the life of the assembly.

Insert bearings from different brands are often interchangeable if the main dimensions match: shaft diameter, outside diameter and inner ring width. It is not enough for the part number to be similar; the actual measurements and the locking method must be compared. If the housing is from another brand, send us the old part number and we will indicate the compatible LINK-BELT alternative.

If you need an ER-K insert for equipment that is down, send the complete part number by WhatsApp to MR Accesorios Industriales. We will quote it shortly and, if you are looking for a variant that does not appear in the list, write to us with the model you need and we will provide a solution.

The Link-Belt spherical roller bearing is a two-row oscillating component, designed to withstand high radial loads and angular misalignments between shaft and housing. Its spherical outer raceway allows the assembly to self-align, absorbing shaft deflections and mounting errors. It is used in equipment with long shafts, belt or chain drives, and machinery subjected to vibration. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in industrial bearings.

The designation of the 22200 series reads by its base number: the first two digits indicate the bearing type and the following ones the size. The suffix LB identifies the Link-Belt execution, and the final C3 indicates a radial internal clearance greater than standard, useful when the fit or the working temperature closes the clearance. Examples such as 22209LBC3, 22210LBC3 or 22216LBC3 show that structure: series number, brand suffix and clearance class. The 22300 series, on the other hand, has greater width and load capacity.

These bearings are used in belt conveyors, vibrating screens, mills, mixers, centrifugal pumps and industrial fans. In Argentina they are common in food, cement, mining and aggregate processing plants, where shafts suffer bending and misalignment. They also appear in gearboxes and road machinery. Their self-aligning capacity reduces wear and extends service life against imperfect mountings or structural settlements.

To select correctly, take into account the radial and axial load, the rotation speed and the shaft diameter. C3 clearance is recommended when the fit is tight or there are thermal gradients. The sealing can be open, with shields or with seals, depending on the environment: in the presence of dust or humidity, choose sealed variants. Lubrication with high-viscosity grease and the initial alignment of the housing are key to avoiding premature failures. Mount with appropriate tools and check the clearance after fitting.

Regarding equivalences, Link-Belt spherical roller bearings can be interchanged with other brands that follow the same dimensional and clearance designation. The Link-Belt 22200 series shares dimensions with equivalent series from other manufacturers, but always verify the clearance suffix and the sealing type before replacing. MR Accesorios Industriales advises you to find the compatible alternative for your application.

If you need a Link-Belt spherical roller bearing, write to us via WhatsApp with the complete part number or the shaft and housing dimensions. At MR Accesorios Industriales we will quote you shortly and indicate the option that best suits your equipment. We can also manufacture split plummer block housings to measure if your mounting requires it.

The LINK-BELT 22200 series spherical roller bearing is a self-aligning component with two rows of rollers, designed to withstand high radial loads and angular misalignment between shaft and housing. It is used in rotating equipment where the shaft may flex or the mounting is not perfectly coaxial. MR Accesorios Industriales carries this line with the same technical assistance as always: send us the part number and we will quote it.

The 22200 series designation reads as a size and variant code. The first digits indicate the dimension series; the following number defines the bore diameter. The LBK suffix identifies the LINK-BELT execution and the final letter C corresponds to an internal clearance greater than standard, intended for mountings with tight fits or high operating temperatures. Examples such as 22209LBKC3, 22210LBKC3 or 22216LBKC3 show how the size changes while keeping the same designation scheme.

These bearings are used in belt conveyors, vibrating screens, mills, mixers, gearboxes and continuous process equipment. In the Argentine industrial sector they appear in food, cement, mining, chemical and aggregate processing plants, where sustained rotation and variable loads demand a robust, easy-to-maintain bearing. The self-aligning capability compensates for small misalignments without penalizing service life.

To select correctly, consider the radial and axial load, the rotation speed and the type of sealing required according to the environment. Mounting must be done with suitable tools, avoiding direct blows on the rings. Lubrication, with grease or oil depending on the application, and careful alignment of the shaft with respect to the housing are key to maximizing service life. The C3 internal clearance facilitates mounting with interference fits.

As for equivalents, spherical roller bearings from different brands can be interchanged if the main dimensions, load capacity and sealing configuration match. It is always advisable to verify the full part number and tolerances before replacing. LINK-BELT is a brand that MR carries, and we can guide you to find the right reference within the line.

If you need a LINK-BELT 22200 series spherical roller bearing, message us on WhatsApp with the part number or the measurements. At MR Accesorios Industriales we will quote you promptly and point you to the compatible alternative if needed. More than 80 years supporting Argentine industry back us up.

LINK-BELT spherical roller bearings are self-aligning double-row components designed to support high radial loads and moderate axial loads in both directions. Their spherical outer raceway allows the assembly to self-align against angular misalignment of the shaft relative to the housing, simplifying mounting and reducing precision requirements on the base. They are used in equipment with shaft deflection, imperfectly machined seats, or vibration, and are a common choice in industrial power transmission.

The series designation combines the bearing number with the LB suffix of the LINK-BELT line. In a code like 22209LB, the first three digits indicate the dimension series (222, 223, 232, or 239, with different width and section proportions) and the last two are the bore code: multiplied by 5 gives the inner diameter in millimeters (09 → 45 mm). Thus, 22209LB and 22216LB share the series and differ in size.

In Argentine industry, these bearings appear in mining, cement, steel, paper, aggregate processing, and material handling equipment. They are found in belt conveyors, vibrating screens, mills, crushers, industrial fans, and continuous process machines. They are also used in applications where the shaft flexes under load or where the housing does not guarantee perfect alignment. MR Accesorios Industriales sells the LINK-BELT line for these sectors, with technical advice to choose the right variant.

For correct selection, consider radial and axial load, rotational speed, shaft diameter, and housing type. Sealing is key: in environments with dust, water, or particles, effective seals and proper lubrication are recommended. Internal clearance must be compatible with the fit and operating temperature. During mounting, verify initial alignment, use appropriate tools, and avoid direct blows on the rings. Lubrication must be as specified by the manufacturer and renewed according to the operating regime.

Spherical roller bearings from different brands can be interchanged if main dimensions, load type, and sealing configuration match. Series with equivalent numbers usually share dimensions, but internal clearance, cage, or heat treatment may vary. Therefore, before replacing equipment, compare complete specifications and not just the code. If in doubt, MR will indicate the compatible alternative for your application.

To request a quote for a LINK-BELT spherical roller bearing, send the complete code by WhatsApp. If you don't have it handy, provide shaft and housing dimensions, load type, and working conditions. At MR Accesorios Industriales we respond promptly with the option that best fits your equipment. We can also advise on mounting, lubrication, and sealing to extend bearing life.

LINK-BELT cylindrical roller bearings are high-capacity components designed to withstand high radial loads and considerable speeds. Their cylindrical roller design provides linear contact that distributes load better than a ball bearing, making them ideal for demanding industrial applications. They are available in different series depending on their construction and dimensions, and are selected by size. At MR Accesorios Industriales we supply them and provide advice so you can choose the right one.

The designation of these LINK-BELT series is organized by numbers that identify size and construction. For example, the 1000 series and the 1200 series group single-row cylindrical roller bearings, while the 5200 series and the 5300 series correspond to double-row designs. The 1300 series and the 1900 series cover other dimensional variants. Each series includes several sizes; to request a quote, simply indicate the full part number or the main dimensions (bore, outer diameter and width).

These bearings are used in power transmission equipment, gearboxes, pumps, fans, machine tools and conveyors. In Argentine industry they appear in food processing, cement, steel, paper and mining plants, where radial loads are high and speeds are moderate to high. They are also common in applications with long shafts that need to tolerate small thermal expansions, provided the mounting allows controlled axial displacement.

To select the correct bearing, take into account the radial load and rotational speed, as well as the type of sealing: open, with shields or with seals. Proper lubrication (grease or oil) and precise alignment of the shaft and housing are key to service life. If the bearing is separable, verify that the inner and outer rings are mounted with the recommended internal clearance. In contaminated applications, choose variants with seals to retain lubricant and block particles.

Regarding equivalences, cylindrical roller bearings are interchangeable between manufacturers if the main dimensions and construction type match (single or double row, with or without flanges). There is no universal part number cross-reference: each brand uses its own nomenclature. Therefore, when requesting an alternative, it is best to provide the original part number and dimensions. At MR Accesorios Industriales we can guide you to find the right option among the brands we supply.

If you need a LINK-BELT cylindrical roller bearing, write to us on WhatsApp with the part number or dimensions you are looking for. We will quote you promptly and help you identify the series that corresponds to your equipment. We can also advise you on mounting and lubrication so that the installation is reliable.