Brand we market
An INA Y bearing or insert receives the shaft within a housed arrangement. Separate the insert reference from the shape of the surrounding housing when describing it. A pillow block and a flange unit may look like different requests externally, while the inquiry may concern only their inner bearing. An insert should also not be confused with a conventional deep groove bearing simply because both use balls.
See all INA bearings references →INA guide →Y-bearings (inserts) from all brands →INA needle roller bearings →INA cam followers and track rollers →
The line includes UC201, GYE12-XL-KRR-B and GE17-XL-KRR-B. UC201 combines letters and digits without separators; the others add hyphenated blocks. GYE and GE are different groups and must remain complete. Copy XL-KRR-B together without assigning material, seal type or service conditions to those segments here. The full designation guides identification; neither a matching number nor similar faces confirms correspondence with the existing housing.
On a shaft supported by a structure, relate the insert bore, outside surface and shaft fastening arrangement. These details distinguish which part is being replaced. For conveying or feeding machinery, a photograph of the whole support locates the position, while an insert detail shows its own marking. If the housing remains, document its condition and geometry so the request does not describe a complete unit when only the inner component is needed.
Prepare the insert code, shaft diameter, outside and width measurements, photograph and application for MR Accesorios Industriales. Add the housing code if visible, an image of the shaft fastening and the number of identical positions. When each face has a different marking, photograph both and copy each block without combining them by guesswork. A machine drawing helps establish which designation belongs to the replacement.
It helps, but the inner component needs its own identification and verification of the shaft connection.
No. A partially matching number does not demonstrate equal construction or mounting.
Yes, together with an insert detail. Both views distinguish the requested component from the surrounding housing.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
The Y-bearing (insert bearing) is a ball bearing with a spherical outer ring and one or two sealed faces, designed to be mounted directly in split plummer block housings or in housings. The INA UC series is used in transmission, conveying and agricultural or industrial machinery. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the correct insert according to your application.
It is used in equipment where the shaft rotates and the housing remains fixed, with normal load and speed requirements. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and helps you choose the exact code for your application.
Some codes:GE20-XL-KRR-B-FA125GE20-XL-KRR-B-FA164GE25-XL-KRR-B-FA101GE25-XL-KRR-B-FA125GE25-XL-KRR-B-FA164
The INA G-KRR-B-AS/V series Y-bearing (insert bearing) is an insertable bearing with a spherical outer ring, designed to be mounted in split plummer block or flanged housings to form a bearing unit. It is used in equipment where the shaft rotates and the housing remains fixed, with normal load and speed requirements. MR Accesorios Industriales sells this line, with technical advice to choose the correct part number.
Some codes:G1010-KRR-B-AS2/VG1012-KRR-B-AS2/VG1014-KRR-B-AS2/VG1015-KRR-B-AS2/VG1100-KRR-B-AS2/V
Just the manufacturer part number is enough: we will quote it and provide dimensions and equivalents via WhatsApp or email.
