Exclusive representative in Argentina
171 BGL part numbers in lock washers, each with its own page to request a quote. Below, the main series and the full list.
See all BGL bushings and sleeves references →Lock washers from all brands →
The BGL MS lock washer is a washer that fits over the HM nut of a large adapter sleeve and locks it in place with a screw. Its purpose is to prevent the nut from loosening due to vibration or rotation, keeping the bearing properly fitted on the shaft. It is used in large adapter sleeve assemblies, where the nut must be securely locked.
Some codes:MS30/530MS30/530-600MS30/560MS30/630MS30/670
The MB lock washer is a locking accessory used together with KM nuts to secure adapter sleeves on shafts. Its design with a straight internal tooth is inserted into the shaft groove and one of its tabs is bent over a notch on the nut, preventing it from loosening due to vibration. It is a key part for maintaining the axial position of bearings and other rotating components.
The AW lock washer from BGL is a locking accessory placed between the KM lock nut and the adapter sleeve to prevent the nut from loosening due to vibration. Its inclined tooth design works together with the sleeve slots and the nut notches, blocking rotation. It is manufactured in carbon steel, with a stainless steel option for corrosive environments. It is a key part in bearings mounted with adapter sleeves, where secure tightening is critical.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Just the manufacturer part number is enough: we will quote it and provide dimensions and equivalents via WhatsApp or email.
