Exclusive representative in Argentina
BGL hydraulic sleeves use oil assistance during mounting or removal. Identifying the connection circuit matters as much as the fit between shaft and bearing. The range contains adapter and withdrawal references, so requesting only a hydraulic sleeve does not establish the required arrangement. Relate the part to the bearing, connection access and equipment used for the maintenance operation.
See all BGL bushings and sleeves references →BGL guide →Hydraulic sleeves from all brands →BGL adapter sleeves →BGL withdrawal sleeves →
AOH30/530, OH30/500H and OHE30/500H have different initial blocks. The first ends with a number after the slash; the others retain a final H. Record those differences literally. Reading the designation identifies a catalog reference but does not allow pressure, shaft diameter or capacity to be calculated from its numbers. Compare variants using mounting documentation and the connections actually present on the part.
At mill supports, process fans or industrial rollers, the sleeve belongs to a broader maintenance sequence. Check whether connections remain accessible with the bearing and covers installed, where the shoulder sits and which direction permits movement. Identify the pump and accessories separately: a connection that screws together does not establish suitability of the entire circuit. Record whether the intended operation is bearing installation, removal or both.
Send MR Accesorios Industriales the code, main dimensions, photographs of ports and ends, application and associated bearing. Add an assembly photograph and identification of existing hydraulic accessories. This allows the sleeve and auxiliary equipment inquiry to distinguish a replacement part from a complete kit.
No. Adapter or withdrawal arrangement, access and connections must be checked for the selected reference and actual shaft.
Do not derive it by interpreting digits. Pressure and procedure come from documentation applicable to the hydraulic assembly.
Yes, if you have one. Identified connections and accessories also help, because the sleeve is only one part of the maintenance system.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
The BGL AOH series hydraulic sleeve is a mounting and dismounting component that is placed on the shaft to make installing and removing bearings easier, especially on medium and large diameter shafts. Its design incorporates internal channels that allow pressurized oil to be injected, creating a film that reduces friction between the parts. MR Accesorios Industriales sells this series in standard sizes for different industrial applications.
The BGL OH…H hydraulic sleeve is a fastening component that incorporates internal and external channels for injecting oil under pressure. This facilitates mounting and, above all, dismounting on medium and large diameter shafts, from 140 mm. It is used to secure bearings or other elements on the shaft with a firm and removable fit without damaging the surfaces.
The BGL AOH GG series hydraulic sleeve is a mounting and dismounting component placed on the shaft to facilitate the installation and removal of bearings and other parts with an interference fit. Unlike the conventional withdrawal sleeve, it incorporates internal channels that allow pressurized oil to be injected, creating a film that reduces friction and simplifies maintenance tasks on medium and large shafts.
Some codes:AOH32/530GGAOH32/630GGAOH39/500GGAOH39/530GGAOH39/560GG
Just the manufacturer part number is enough: we will quote it and provide dimensions and equivalents via WhatsApp or email.
