Skip to content
All products

Blog

Sealmaster dimensions: how to identify the code from the part and what data to send for a quote

We explain how to read the dimensions and the code engraved on a Sealmaster bearing or housing, what data to send for a quote, and common mistakes when ordering.

SEALMASTER catalog by part number

Technical team at MR Accesorios Industriales · Updated on November 17, 2026

Share on LinkedIn

Sealmaster dimensions: how to identify the code from the part and what data to send for a quote

How to identify a Sealmaster Y bearing (insert)

Y bearings, also called inserts, are the ones mounted inside a housing. They are recognized by their spherical outer ring, which allows them to align inside the housing. In the Sealmaster line, codes such as MH-20, MH-23 or MH-24 correspond to this family in our catalog, and it is best to look for the code engraved on the part. That code is the key to replacing the exact part without relying on memory or a printed catalog.

To identify the insert from the part, first clean the area where the code is engraved. If the engraving is worn, the main dimensions can be taken: bore diameter, outer diameter and width. It is also worth checking whether the insert has a rubber seal on both sides (suffix 2RS) or a metal cap (suffix 2Z), because that changes the full reference.

When ordering a Sealmaster insert, the most practical thing is to send a photo of the part showing the code and, if possible, a photo of the housing where it is mounted. If the code is not visible, you can send the dimensions and a description of the equipment. We supply and distribute Sealmaster inserts and quote the exact reference for your application.

Sealmaster spherical roller bearings: how to read the code and dimensions

In the Argentine market two names coexist: rodamiento and rulemán, but we are talking about the same part. Within the Sealmaster line, codes such as PN-204, PN-205 and PN-206 appear in our catalog in the spherical roller bearing family, and the code is usually engraved on the side face of the part.

To get the code from a used spherical roller bearing, clean the part well with a cloth and look for the engraving in good light. If the code is illegible, you can measure the bore diameter, outer diameter and width, and compare with a dimension table. It is also useful to note whether the bearing has a tapered bore (suffix K) or increased internal clearance (suffix C3), because that is part of the full code.

When quoting a Sealmaster spherical roller bearing, we recommend sending the full code if visible, or the dimensions and a photo of the part. We distribute Sealmaster spherical roller bearings and help you identify the correct reference from the data you send us.

Sealmaster Y housing with insert bearing: identification and ordering

The Y housing with insert bearing is an assembly that includes the housing and the insert. In our Sealmaster catalog, codes such as TBMH-16, SFMH-31 or SFMH-32 appear in this family. The engraving is usually on the housing body or on the insert.

To identify a Y housing with insert bearing, the first thing is to see whether the code is on the housing or on the insert. If the assembly is put together, the insert code can be read on the side face. If the housing is empty, you can measure the distance between the mounting holes and the bore diameter of the insert it should carry. It is also worth noting the shape of the housing and how it is fixed, because that helps define the code.

When ordering a Sealmaster Y housing with insert bearing, the ideal thing is to send a photo of the assembly and, if possible, a photo of the insert showing the code. If the insert is damaged and cannot be read, you can send the housing and shaft dimensions. We supply Sealmaster Y housings with insert bearings and quote the complete assembly or the insert separately, depending on what you need.

Sealmaster housings: how to order the right one without mistakes

Sealmaster housings are the base where the inserts are mounted. Codes such as PN-20T, PN-12T or PN-22T appear in that family in our catalog. The code is usually engraved on the housing body; sometimes it is on the bottom and you have to remove it to see it.

To identify a Sealmaster housing with no visible code, you can take the mounting dimensions: distance between holes, hole diameter and shaft center height. It is also useful to know which insert it carried, because the insert code often defines the compatible housing.

When quoting a Sealmaster housing, it is best to send a photo of the housing and, if available, a photo of the insert it carried. If the housing is broken or very worn, you can send the mounting dimensions and the shaft diameter. We distribute Sealmaster housings and indicate the exact reference from the data you send us.

How to take the dimensions of a Sealmaster bearing or housing

Taking dimensions correctly is key when the code is not visible or is incomplete. For a bearing, the three main dimensions are: bore diameter (the hole where the shaft goes), outer diameter and width. They are measured with a caliper or micrometer, in millimeters. In Y inserts, the bore diameter is usually in inches or millimeters depending on the series, so it is best to measure precisely and note the unit.

For housings, the important dimensions are the distance between mounting holes, the hole diameter and the height from the base to the shaft center. In all cases, a photo with a ruler next to it helps verify the dimensions.

When sending dimensions for a quote, it is better to send a simple drawing or a photo with the dimensions marked. It is best to include as much data as possible. We help you interpret the dimensions and find the correct Sealmaster code.

Common mistakes when ordering a Sealmaster bearing or housing

One of the most frequent mistakes is ordering only by shaft size, without checking the housing type or the insert locking method. The same shaft diameter can correspond to inserts with different locking methods, and they are not interchangeable in all cases. Another mistake is confusing the housing code with the insert code, because sometimes they share numbers but are not the same part.

It is also common to forget the code suffixes, such as 2RS, 2Z, C3 or K, which indicate seals, internal clearance or tapered bore. Those suffixes change the full reference and, if omitted, you may receive a part that does not work for the application. With housings, a typical mistake is not checking the distance between mounting holes, which can vary between series even if the insert is the same.

To avoid these mistakes, we always recommend sending a photo of the part and, if possible, a photo of the assembly where it is mounted. If there is no photo, you can send the complete dimensions and a description of the equipment. We quote the exact reference.

What data to send for a Sealmaster quote

To quote a Sealmaster bearing or housing, the most useful thing is to send the full code if visible, or a clear photo of the part. If the code is not visible, you can send the main dimensions and a description of the equipment where it works. For housings, it is best to include the distance between holes and the housing type. The more data you send, the faster and more accurate the quote will be.

It is also useful to know the brand and model of the equipment where the part is mounted, because sometimes the manual has the original reference. If the part comes from another brand, send us a photo and the code it has, and we will review it.

We supply and distribute Sealmaster bearings and housings in Buenos Aires, Argentina. You can write to us by WhatsApp or email with the code, dimensions or a photo of the part, and we will quote you promptly.

Frequently asked questions

How do I identify the code of a Sealmaster bearing if it is not visible?

If the code is not visible, clean the part and look for the engraving in good light. If it is still illegible, measure the bore diameter, outer diameter and width, and send us those dimensions along with a photo. We help you identify the correct reference.

What dimensions do I need to order a Sealmaster housing?

For a housing you need the distance between mounting holes, the hole diameter and the height from the base to the shaft center. It is also useful to know the housing shape and the insert code if you have it.

Can I order only the Sealmaster insert without the housing?

Yes, we supply Sealmaster inserts separately. You only need the insert code or its dimensions, and we quote the exact reference. If the insert is mounted in a housing, it is best to verify that the housing is compatible.

What do the suffixes 2RS, 2Z, C3 and K mean on a Sealmaster bearing?

2RS indicates a rubber seal on both sides, 2Z indicates a metal cap on both sides, C3 indicates internal clearance greater than normal and K indicates a tapered bore. These suffixes are part of the full code and must be included when ordering.

How do I get a quote for a Sealmaster bearing or housing?

You can write to us by WhatsApp or email with the code, dimensions or a photo of the part. We will quote the exact reference promptly.

Products with photos in the catalogue

Keep reading

Continue here

Need a SEALMASTER quote?

Send us the SEALMASTER part number, the size or a photo of the part and we will get back to you with a quote.

See SEALMASTER at MR

Request a SEALMASTER quote on WhatsApp
Request a quote on WhatsApp