Double-row angular contact ball bearings
475 references. Each one has its manufacturer part number.
Search for your part number in Double-row angular contact ball bearings
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Most searched part numbers
The ones searched most on Google. Each one opens its datasheet, with dimensions and a WhatsApp quote.
- SKF 3205 A
- SKF 3309 A
- SKF 3212 E
- SKF 3305 A
- SKF 3207 A
- SKF 3208 E/C3
- SKF 3210 E
- SKF 3306 E/C3
- SKF 3311 E
- SKF 3205 A-2Z
- SKF 3205 A/C3
- SKF 3205 ATN9
- SKF 3309 ANR
- SKF 3309 DMA
- SKF 3309 A-2Z
- SKF 3212 A
- SKF 3212 A-2Z
- SKF 3212 A/C3
- SKF 3305 ANR
- SKF 3305 A-2Z
- SKF 3305 A/C3
- SKF 3207 A-2Z
- SKF 3207 A/C3
- SKF 3207 ATN9
- SKF 3208 A
- SKF 3208 A-2Z
- SKF 3208 A/C3
- SKF 3210 A
- SKF 3210 A-2Z
- SKF 3210 A/C3
By part number, all brands and versions
The double-row angular contact ball bearing has two rows of balls with inclined raceways, within a single inner and outer ring. It supports radial and axial loads in both directions, as well as moments, and takes up less space than two single-row bearings mounted face-to-face. It is selected based on shaft and housing diameter, load type, speed and required internal clearance.
The last two digits multiplied by 5 give the bore from 04; with 00 the bore is 10 mm and with 02, 15 mm, as in 3200 ATN9 or 5302S. Series 32 and 33 are from SKF and 52 and 53 from NSK and NTN: 5210, 5211 and 5310 in NSK, 5200S and 5303S in NTN. Suffixes indicate sealing and design: 2RS1 (3200 A-2RS1TN9/C3) is contact seals on both sides, 2Z (3201 A-2ZTN9/C3) are metal shields, and in NSK ZZ (5210AZZ) indicates shields and DDU (5210ADDU), seals. TN9 is a polyamide cage and C3, a greater than normal internal clearance.
They are used in gearboxes, pumps, compressors, fans and drives where the shaft must be rigid and centered. They are useful when the axial load changes direction, because a single bearing absorbs it in both directions. If the axial load is in one direction only, a single-row angular contact bearing is more suitable.
We work with double-row angular contact ball bearings from SKF, NSK and NTN. Send us the complete part number stamped on the bearing via WhatsApp or email, or if you don't have it, the shaft diameter, outside diameter, width and sealing type. With that we will indicate the equivalent between brands and quote it promptly.
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Double-row angular contact ball bearings by part number
Send us the part number and we'll quote you
Photo of the part, part number written on a piece of paper, drawing or spreadsheet: whatever you have at hand.
Request your quote via WhatsApp or email, with the quantity you need.