SKF 1322 KM self-aligning ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Self-aligning ball bearings
We respond promptly.
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 1322 KM
- 13Series
- Self-aligning ball bearings, 13 series. For the same bore, each series has a different outside diameter and width.
- 22Bore
- 110 mm bore: 22 × 5.
- KMSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
1322 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 1322 KM bearing has a 110 mm bore, a 240 mm outside diameter and a 50 mm width (110 x 240 x 50 mm).
SKF 1322 KM is a reference of self-aligning ball bearing, within Bearings. Request a quote for 1322 KM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF KM series self-aligning ball bearings are ball bearings with a spherical outer ring and a cylindrical bore, designed to carry radial and axial loads in both directions. Their self-lubricating design and their alignment capability make them ideal for applications where misalignment or shaft deflection may occur. MR Accesorios Industriales carries this line as part of its broad range of SKF bearings.
The KM series designation is interpreted as follows: the base number indicates the size and load capacity, while the suffix KM indicates that the bearing has a tapered bore (taper 1:12) for mounting on tapered shafts or adapter sleeves. For example, a 1224 KM bearing corresponds to the 12 series with a tapered bore, and a 2222 KM belongs to the 22 series, also with a tapered bore. This nomenclature makes it possible to quickly identify mounting features and dimensions.
These bearings are used in a wide variety of industrial applications in Argentina, such as belt conveyors, textile machines, bottling equipment, industrial fans and agricultural machinery. Their ability to compensate for angular misalignment makes them suitable for long shafts or shafts subject to deflection, where other bearing types would suffer premature wear. Industries such as food, chemical and metallurgical use them for their robustness and low maintenance.
To correctly select a KM series self-aligning ball bearing, take into account the radial and axial load it must carry, the rotational speed and the environmental conditions. Mounting requires thorough cleaning and the use of suitable tools to avoid damage to the raceways. Lubrication must be the one recommended by the manufacturer, and it is essential to verify shaft and housing alignment to take advantage of the bearing's self-aligning capability. The seal, if present, protects against contaminants.
As for equivalents and interchangeability, SKF KM series self-aligning ball bearings can be replaced by products from other brands that follow the same designation and standardized dimensions. However, it is important to verify tolerances and internal clearance, as they may vary between manufacturers. Always check the technical specifications before replacing a bearing to ensure optimal, long-lasting operation.
If you need an SKF KM series self-aligning ball bearing, at MR Accesorios Industriales we advise you so you choose the correct part number. Send us the part number by WhatsApp and we will quote you shortly. We are your reference in bearings and power transmission.
Dimensions
Boundary dimensions of the basic designation 1322 per ISO 15: 110 x 240 x 50 mm (d x D x B).
- Bore
- 110mm
- Outside diameter (D)
- 240mm
- Width (B)
- 50mm
The same size in other brands
Pages from other brands with the basic designation 1322: 110 x 240 x 50 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 1322 KM bearing?
- The SKF 1322 KM bearing has a 110 mm bore, a 240 mm outside diameter and a 50 mm width (110 x 240 x 50 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 1322.
- What does the KM suffix mean on an SKF bearing?
- The KM suffix indicates that the bearing has a tapered bore with a 1:12 taper, designed to be mounted on tapered shafts or by means of adapter sleeves. This makes mounting and dismounting easier and allows the internal clearance to be adjusted.
- For what applications is a KM series self-aligning ball bearing recommended?
- It is recommended for applications with combined radial and axial loads, and where misalignment between shaft and housing may exist, such as conveyors, fans, textile machines and agricultural equipment. Its self-aligning capability reduces wear.
- How is a self-aligning ball bearing with a tapered bore mounted?
- Mounting is done on a tapered shaft or with an adapter sleeve. It is crucial to clean the surfaces, apply the appropriate pressure and verify the internal clearance after mounting. Following the manufacturer's instructions and using suitable tools is recommended.