DODGE Power transmission

Dodge HT500 timing belt pulleys are power transmission components that work with timing belts to achieve an exact rotation ratio between shafts. They are used when slippage is not allowed and synchronism is required, such as in machine tool drives, pumps and process equipment. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct pulley according to pitch, number of teeth and shaft diameter.

The designation of these pulleys is read in blocks. For example, in 8MX-22S-12-1008 the prefix 8MX indicates the belt pitch (8 mm); the following number, 22S, the number of teeth and the hub type; 12 the belt width; and 1008 the shaft diameter and the fixing system. In 8MX-25S-21-1108 the width and the bushing change. The HT500 series covers 8M and 14M pitches, with variants of teeth and widths for different powers.

In Argentine industry, these pulleys appear in packaging lines, textile machines, printing equipment, screw compressors and positioning systems. They are also found in the food sector, where cleanliness and precision are critical, and in water treatment plants. Because they do not slip, they maintain synchronism between shafts and prevent phase errors in continuous processes.

To select a timing belt pulley, take into account the pitch, the number of teeth, the belt width and the shaft diameter. Verify that the taper bushing or the fixing system is compatible with the shaft and that the pulley is aligned with the driven wheel. Lubrication does not apply in these drives, but belt tension control and tooth cleanliness do. A misaligned mounting accelerates wear.

Dodge HT500 timing belt pulleys can be interchanged with other brands that use the same belt profile and number of teeth, as long as the pitch, width and shaft diameter match. It is not enough for the part number to be similar: the tooth geometry and the fixing system must be compared. If you need to replace an existing pulley, send us the complete part number and the original brand.

To request a quote for your Dodge HT500 timing belt pulley, write to us on WhatsApp with the complete part number, for example 8MX-27S-12-1108, or with the shaft and belt dimensions you are going to use. At MR Accesorios Industriales we indicate the equivalent reference and advise you so that the drive is properly sized. We respond promptly.

The DODGE V-belt pulley is a power transmission component that mounts on the shaft and transmits motion through V-belts. It is used in industrial machines, process equipment and drive systems where a reliable transmission ratio is required. MR Accesorios Industriales carries this line as a brand, with more than 80 years of experience in the field.

The designation of these pulleys is read in blocks: the first number indicates the number of grooves, the letter identifies the belt section and the final numbers correspond to the pitch diameter in inches. For example, 1B5V42 is a single-groove pulley for a 5V belt with a 42-inch pitch diameter. The series covers from 1B5V42 to 1B5V56 and other similar combinations.

They are used in industrial fans, compressors, centrifugal pumps, conveyors and process equipment in food, chemical and petrochemical plants. In Argentina they are common in agriculture and in the manufacturing industry, where belt drives remain a robust, low-maintenance solution.

To select a V-belt pulley you must consider the power to be transmitted, the shaft speed and the desired transmission ratio. It is important to verify the shaft diameter and the type of bushing or mounting. Alignment between pulleys and correct belt tension are key to avoiding premature wear and vibration.

DODGE pulleys are interchangeable with other brands that use the same section and pitch diameter designation. It is always advisable to confirm the shaft dimensions and the fastening system before replacing a pulley. MR Accesorios Industriales advises you to find the right equivalent.

If you need a V-belt pulley for your equipment, write to us on WhatsApp with the part number or the dimensions you are looking for. At MR Accesorios Industriales we will quote you promptly and indicate the compatible alternative if needed.

DODGE HT250 Taper-Lock timing belt pulleys are power transmission components that run with timing belts to achieve an exact speed ratio, without slipping. They are used in machines where synchronization between shafts is critical, such as packaging machines, printers, compressors and automation equipment. MR Accesorios Industriales supplies this line with Taper-Lock taper bushing, which simplifies mounting and dismounting. If you need a pulley for your application, message us on WhatsApp with the part number and we'll send you a quote.

The designation of these pulleys combines the pitch diameter, the pitch and the belt width. For example, P22-8M-20-1108 indicates a pitch diameter of 22 mm, 8M pitch, belt width 20 mm and a Taper-Lock 1108 bushing. In P24-8M-30-1108 the diameter changes to 24 mm and the width to 30 mm, keeping the same bushing. The HT250 series covers different combinations to suit each shaft and power. The final numeric suffixes identify the bushing, which defines the maximum allowable shaft diameter.

These pulleys are used in Argentine industries such as food, textile, plastics and metalworking. They are found in conveyors, mixers, pumps, fans and machine tools. Their toothed profile guarantees synchronous transmission, ideal for processes where slipping is not allowed. They are also used in packaging and labeling equipment, where feed precision is essential. MR Accesorios Industriales supplies them for replacement and new projects throughout the country.

To select the correct pulley, take into account the belt pitch, the number of teeth, the pitch diameter and the width. The Taper-Lock bushing must match the shaft diameter and the keyway. Check the alignment between pulleys to avoid premature belt wear and noise. Lubrication does not apply to these drives, but periodic cleaning does. Mounting is done by inserting the bushing into the pulley and tightening the set screws with a torque wrench according to specification.

HT250 timing belt pulleys are interchangeable with other brands that use the same profile and pitch, as long as the number of teeth, width and bushing type match. Equivalences with lines from European and American manufacturers are common. To ensure compatibility, it is necessary to compare the pitch diameter, the pitch and the fastening system. At MR Accesorios Industriales we advise you to find the alternative that best suits your equipment.

If you need an HT250 Taper-Lock timing belt pulley, send us the part number or the dimensions on WhatsApp. At MR Accesorios Industriales we'll send you a quote shortly and indicate the most convenient option for your application. We can also advise you on the right bushing and mounting accessories.

The DODGE Series G gear reducer is a power transmission unit that reduces input speed and multiplies torque at the output. It is used in industrial drives where revolutions need to be controlled and available force increased. MR Accesorios Industriales sells this line with technical support so you choose the right model for your application.

The designation of these reducers combines a base number with the final letter R, as in 449659R or 449666R. That R identifies the variant within the family and lets you locate the unit in the catalog. The G525, G700, G920 and G700HR3 series group different capacities and configurations; the numeric examples you see here are specific references from that nomenclature. To request a quote, send us the complete part number shown on the unit's nameplate or in your spare parts list.

These reducers are used in conveyors, mixers, agitators, pumps, mills and lifting systems. In Argentina you will find them in food, chemical, cement, mining and aggregate processing plants, where the drive works with variable loads and demands reliability. They are also used in material handling equipment and in process lines that need to maintain a stable transmission ratio throughout the shift.

To select the reducer, take into account the input power and revolutions, the desired reduction ratio, the output torque and the environmental conditions. Installation requires properly aligning the input shaft with the motor and the output shaft with the driven machine, using the appropriate supports and respecting the lubricant indicated for the working position. Sealing and ventilation also affect the unit's service life.

Between brands, reducers are interchanged by performance: ratio, torque, power and mounting type. It is not enough for the part number to be similar; the service conditions and the mechanical interface must be compared. If you need to replace an existing unit, send us the nameplate data and the application, and we will tell you the compatible alternative within the DODGE line we sell.

MR Accesorios Industriales sells the DODGE brand with more than 80 years of experience in the Argentine industrial market. If you already have the reducer's part number, write to us on WhatsApp and we will quote you promptly. If you are looking for a variant that does not appear, send us the model or reference and we will give you a concrete answer.

The DODGE G525 series reducer is a power transmission unit designed to reduce rotation speed and multiply torque in demanding industrial applications. It is used in conveyor belts, mixers, agitators and drive systems where precise speed control and high load capacity are required. MR Accesorios Industriales carries this line with the backing of more than 80 years in the Argentine market.

The G525 series designation is complemented by a six-digit code number followed by the letter L, as in 449659L or 449666L. That final letter identifies the mounting configuration or the output shaft type according to the manufacturer's catalogue. To select the right reducer, have the complete code and the operating conditions on hand: power, input speed, reduction ratio and mounting arrangement.

These reducers are used in the food, chemical, petrochemical and aggregate processing industries, among others. In Argentina they are found in processing plants, pumping systems, belt conveyors and agitation equipment. Their robust construction makes them suitable for environments with dust, humidity or variable loads, provided the installation and lubrication conditions indicated for each model are respected.

For a correct selection, verify the required power, the application service factor and the necessary reduction ratio. Mounting must ensure alignment between the input shaft and the motor, and between the output shaft and the driven machine. Proper lubrication and sealing against contaminants are key to service life. If in doubt, consult our technical team on WhatsApp.

DODGE reducers are interchangeable with other brands on the market provided the mounting dimensions, reduction ratio and torque capacity match. If you need to replace an existing unit, send us the nameplate data and we will indicate the compatible alternative. MR Accesorios Industriales advises you so the replacement is direct and safe.

If you already have the code of the reducer you need, write to us on WhatsApp and we will quote it promptly. We can also help you identify the right model if you tell us about the application and which equipment you want to drive. We are in Buenos Aires, Argentina, and we serve the whole country.

The DODGE G series reducer is a power transmission unit that reduces rotation speed and multiplies torque in industrial drives. It is mounted between the motor and the driven machine to adapt revolutions and effort to what the process requires. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct configuration for your application.

The designation of these reducers combines a basic six-digit number with the RCW suffix, as in 449674RCW or 449681RCW. The number identifies the mounting configuration and ratio within the series, and the RCW suffix distinguishes the shaft and housing variant. The G series is organized into the G525, G700, G920 and G700HR3 families, which arrange sizes and capacities. To get a quote, send us the complete part number as it appears on the nameplate or drawing.

These reducers are used in Argentine industries such as food, chemical, water treatment, cement and material handling. They appear in conveyor belts, mixers, agitators, positive displacement pumps and bucket elevators. Also in drives for mills, presses and process equipment where high torque at reduced speed is required. The robust housing and flange or foot mounting make them suitable for continuous service in plant.

To select the reducer, take into account the motor power, the input speed, the reduction ratio and the torque required at the output shaft. Verify the service factor according to the type of load and the daily working hours. During mounting, take care with the alignment between the reducer and the motor, and between the reducer and the driven machine. Correct lubrication and adequate sealing prevent leaks and premature wear. Follow the manufacturer's instructions for tightening and start-up.

DODGE reducers are interchangeable with other brands of similar mounting, but the exact equivalence depends on the ratio, torque and the dimensions of shaft and flange. Matching the nominal power is not enough: you must compare the mounting arrangement, the diameter and length of the shafts, and the position of the holes. If you need to replace existing equipment, send us the part number and the application characteristics so we can indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE line with more than 80 years of experience in industrial distribution. If you are looking for a reducer from the G series, message us on WhatsApp with part number 449674RCW or the one you need. We will quote it promptly and help you define the right configuration for your drive.

The QD bushing is a tapered fastening element that mounts between the shaft and the hub of pulleys, gears, sprockets or couplings. It is installed with screws that, when tightened, compress the bushing onto the shaft and lock it against the hub, achieving a firm and removable connection without additional machining. It is a key part in power transmission because it allows torque transmission, centers the hub and simplifies component replacement in industrial equipment.

The DODGE QD designation is organized by bushing size, and each size accepts a range of shaft diameters. In the series codes, such as 117043, 117049, 119894 or 119899, the number identifies the combination of bushing size and shaft diameter. The SDS, SD and QD series group the different sizes according to the torque capacity and the hub diameter they support. To choose the right one, the governing data are the shaft diameter and the hub size of the equipment.

In Argentine industry, QD bushings are used in transmission pulleys, gears, chain sprockets, couplings and hubs of process equipment. They appear in food, cement, steel, paper, mining plants and in material handling systems. They are also common in pumping, ventilation and conveying equipment, where a tapered connection is needed that withstands loads and allows the hub to be removed without damaging the shaft.

To select a QD bushing, take into account the shaft diameter, the hub size, the torque to be transmitted and the type of load. Mounting is done with the fastening screws, tightening evenly and respecting the recommended torque for the size. Cleaning the tapered surfaces, lubricating the threads and aligning the shaft and hub are key to avoiding slipping and vibration. If the equipment works with dust or humidity, it is advisable to check the sealing and protection of the assembly.

DODGE QD bushings are interchangeable with those of other brands that use the same taper mounting standard, as long as the size, shaft diameter and number of screws match. This compatibility facilitates replacement in existing equipment and allows combining hubs and bushings from different origins. To confirm the equivalence, the safest approach is to compare the original bushing code with the shaft and hub measurements of the equipment.

If you need a QD bushing for a pulley, a gear or a coupling, send the code or model by WhatsApp to MR Accesorios Industriales. We will quote the corresponding DODGE bushing and indicate the compatible alternative if the equipment is another brand. With more than 80 years in Buenos Aires, Argentina, we support the selection and replacement of power transmission components.

The TAPER-LOCK taper bushing is a fastening component mounted between the shaft and the transmission element, such as pulleys, sprockets or couplings. Its tapered design allows a firm, centered fit when the screws are tightened, which makes mounting and removal easy without hammering. MR Accesorios Industriales supplies the DODGE line in various sizes to solve power transmission applications in Argentine industry.

TAPER-LOCK bushings are designated by a four-digit number, such as 1008, 1108, 1210, 1215, 1310, 1610, 1615 or 2517. The first two digits indicate the nominal shaft diameter in inches and the last two the bushing length. For example, 1008 corresponds to a 1 inch shaft and 1/2 inch length, while 2517 is for a 2 inch shaft and 1/2 inch length. The series also includes sizes 3030, 3535 and 4030, which follow the same logic. Knowing this nomenclature allows you to select the correct bushing according to the available shaft.

These bushings are used in a wide variety of industries in Argentina, such as food, chemical, mining and metallurgical. They are used to mount pulleys on fans, pumps, conveyor belts and mixers, among other equipment. Their ability to transmit torque without slipping makes them suitable for applications requiring a secure, easy-to-maintain connection. As a standard component, they facilitate replacement and spare part availability in the local market.

To select the right TAPER-LOCK bushing, take into account the shaft diameter, the torque to be transmitted and the type of load. It is essential to verify that the taper of the bushing and that of the transmission element are clean and free of burrs before mounting. Lubricating the screws and tightening to the recommended torque ensure a correct fit. Alignment between the shaft and the mounted element prevents vibration and premature wear. If the shaft shows wear, it is recommended to evaluate its replacement or repair beforehand.

Regarding interchangeability, DODGE TAPER-LOCK bushings are compatible with those of other brands that follow the same dimensional standard. This means that a bushing from one brand can be replaced by another of the same designation, provided tolerances and tightening torque are respected. MR Accesorios Industriales supplies the DODGE line, a brand, and can advise you on equivalence with other manufacturers. It is important to verify the compatibility of the taper and the bushing length before replacement.

If you need a TAPER-LOCK taper bushing, write to us on WhatsApp with the part number or the shaft dimensions. At MR Accesorios Industriales we will quote you promptly and indicate the compatible alternative if you are looking for another variant. With more than 80 years in the market, since 1945, we support Argentine industry with quality power transmission components.

The BK2 series split taper bushing is a mounting component used to secure pulleys, gears and other transmission elements onto cylindrical shafts. Its split design allows for simple installation and removal, without the need to disassemble the entire assembly. MR Accesorios Industriales carries this DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The BK2 series designation is complemented by six-digit numeric codes, such as 121150, 121152 or 121161. Each code identifies a specific combination of bore diameter, outside diameter and bushing width. The suffixes and variants shown in the catalog allow you to select the exact size according to the shaft and the housing. To choose the correct bushing, have on hand the complete part number or the dimensions of the shaft and the hub where it is mounted.

These bushings are used in a wide variety of industrial applications: conveyors, mills, mixers, pumps, fans and process equipment. In Argentina, they are common in food, cement, mining and petrochemical plants, where reliable fastening that withstands variable loads is required. Their ability to transmit torque without play makes them suitable for equipment operating under demanding conditions.

To select the bushing, verify the shaft diameter and the hub dimensions. Mounting is done by cleaning the surfaces, applying the recommended tightening torque and checking the alignment. Lubricating the threads makes future removal easier. The split design allows the interference to be adjusted without damaging the shaft. If you need technical assistance, MR Accesorios Industriales will indicate the compatible alternative.

Split taper bushings are interchangeable between different brands that use the same mounting standard. To replace an existing bushing, compare the dimensions and the thread type. DODGE offers several series, such as H-PLUS and H, which can be adapted according to the equipment. If you cannot find the exact part number, write to us on WhatsApp with the model or the dimensions and we will quote you promptly.

The DODGE BTL series sprocket is a chain drive component that mounts on the shaft and meshes with the chain to transmit motion and power. It is used in industrial drives that require synchronism and positive drive, such as conveyors, elevators, mills and process machines. MR Accesorios Industriales supplies this line with advice to choose the right pitch, number of teeth and mounting system.

The BTL series designation combines the chain pitch number, the letters BTL and the number of teeth. For example, 35BTL18-1008 corresponds to a sprocket for a 35 pitch chain, with 18 teeth and a 1008 mounting system. In 35BTL22-1210, the 1210 suffix indicates another type of bushing or mounting taper. These codes make it possible to quickly identify the pitch, the number of teeth and the method of attachment to the shaft.

BTL sprockets are used in a wide variety of industries in Argentina: food, cement, mining, chemical, petrochemical and manufacturing. They are found in chain conveyors, bucket elevators, mixers, mills, dryers and continuous process equipment. Their design allows torque transmission with low maintenance and high wear resistance when they are correctly selected and lubricated.

To select a BTL sprocket, take into account the chain pitch, the number of teeth, the shaft diameter, the type of mounting (taper bushing or split taper) and the service conditions: load, speed, environment and lubrication. Installation requires perfectly aligning the sprocket with the chain, checking axial play and securing the mounting according to the manufacturer's instructions. Proper lubrication extends the service life of the assembly.

DODGE BTL series sprockets can be interchanged with other brands that use similar bushing systems, as long as the pitch, the number of teeth and the taper dimensions match. It is essential to verify tolerances and the bushing type to ensure compatibility. At MR Accesorios Industriales we advise you to find the right alternative for your application.

If you need a DODGE BTL series sprocket, send us the complete code by WhatsApp and we will quote it promptly. We can also indicate the compatible alternative if you are looking for a specific variant. MR Accesorios Industriales, with more than 80 years in the market, supports you in the selection and supply of power transmission components.

The DODGE BTL series sprocket is a power transmission component designed to mesh with roller chains. It is used in drive systems that require a precise speed ratio and efficient torque transmission. MR Accesorios Industriales sells this line as part of its power transmission offering, with more than 80 years of experience in the Argentine industrial market.

The designation of the BTL series is interpreted as follows: the initial number indicates the number of teeth of the sprocket, followed by the letters BTL that identify the series. The number after the hyphen corresponds to the bore diameter in inches, expressed in eighths. For example, the part number 40BTL14H-1008 corresponds to a sprocket with 14 teeth and a 1-inch bore. The suffix H indicates that the sprocket has an extended hub for greater strength.

These sprockets are used in a wide variety of industrial applications in Argentina, such as chain conveyors, machine tools, packaging equipment, lifting systems and agricultural machinery drives. They are common in food plants, cement plants, steel mills and in the automotive industry. Their design allows smooth and reliable transmission under demanding working conditions.

To select the right sprocket, take into account the required number of teeth according to the drive ratio, the chain pitch and the shaft diameter. The bore can be cylindrical or tapered with a keyway, and the extended hub facilitates mounting on overhung shafts. It is important to check the alignment between sprocket and chain, and lubricate properly to extend service life. The BTL series accepts taper bushings for quick and safe mounting.

Regarding equivalences, DODGE BTL series sprockets can be interchanged with other brands that follow the same pitch and number of teeth standards, such as Martin, Browning or US Tsubaki, as long as the critical dimensions match. MR Accesorios Industriales advises you to find the compatible alternative for your application.

To receive a quote, send via WhatsApp the complete part number of the sprocket you need, for example 40BTL20H-1610, and we will quote you promptly. If you cannot find the exact reference, write to us with the model or dimensions and we will indicate the right option.

The DODGE BTL series chain sprocket is a power transmission component that meshes with roller chains to transmit motion between shafts. It is used in industrial equipment where rotation must be synchronized and torque transmitted reliably. MR Accesorios Industriales carries this line as a brand, with options for different mounting configurations and applications.

The BTL series designation combines a number indicating the number of teeth with a code that defines the bore diameter and the fastening system. For example, D35BTL26-1210 corresponds to a 26-tooth sprocket with a bore for a 1210 taper bushing, while D35BTL30-1610 has 30 teeth and a 1610 bushing. The D35 prefix identifies the chain pitch. Each reference thus summarizes teeth and mounting in a single code.

These sprockets are used in transmission lines in industrial plants, conveyors, mixers, mills and process equipment. In Argentina, they are common in the food, cement and mining industries and in aggregate processing plants. Their function is to transmit motion from a gearbox or motor to the driven shaft, maintaining synchronization and withstanding the loads inherent to the drive.

To select the right sprocket, take into account the number of teeth, the chain pitch and the type of taper bushing the bore accepts. Taper bushing mounting makes fastening and removal easy without the need for a press. Check the alignment between sprocket and chain, and ensure proper lubrication to reduce wear. The BTL series accepts bushings of different sizes depending on the shaft diameter.

DODGE BTL series sprockets can be interchanged with other brands that use the same chain pitch and taper bushing system, as long as the teeth and bore dimensions match. It is important to verify bushing compatibility and the center distance. If you need to replace an existing sprocket, the code stamped on the part is the safest reference for finding the equivalent.

If you are looking for a DODGE BTL series chain sprocket, message us on WhatsApp with the code or model you need. At MR Accesorios Industriales we will quote it and point you to the compatible alternative. We can also advise you if you have questions about the designation or the mounting.

Dodge 3VX series V-belts are narrow-section V-belts that transmit power between grooved pulleys. They are used in industrial equipment where space is limited and efficient transmission is required. MR Accesorios Industriales carries this Dodge brand line, backed by more than 80 years of experience in the industry. If you need a specific size, message us on WhatsApp and we will quote it for you.

The designation of these belts combines the section and the length. The prefix 3VX indicates a narrow-section V-belt of 3/8 inch, and the number that follows, as in 3VX250 or 3VX265, corresponds to the outside length in tenths of an inch. Thus, 3VX300 equals 30 inches of outside length. This nomenclature makes it easy to quickly identify the belt you need for your equipment.

These belts are used in a wide variety of industrial applications in Argentina: fans, pumps, compressors, conveyors and machine tools, among others. They are common in food, textile, plastics and mining plants, where reliable, low-maintenance transmission is required. Their narrow profile makes them ideal for tight spaces and demanding drive ratios.

To select the correct belt, take into account the pulley section, the required outside length and the working conditions. Check that the pulleys are aligned and in good condition to avoid premature wear. Tension must be correct: too loose causes slippage and too tight overloads the bearings. If you need advice, contact us and we will help you choose.

Dodge 3VX belts are interchangeable with other brands that follow the same narrow-section standard, such as Gates, Dayco or Bando. When replacing, compare the full designation and the length to ensure compatibility. If you cannot find the exact reference, we can offer you an equivalent alternative. Message us on WhatsApp with the part number or the measurements and we will quote you promptly.

MR Accesorios Industriales is your supplier of V-belts and other transmission components. With more than 80 years in the market, we guarantee technical advice and quality products. Send us the part number of the belt you need on WhatsApp and we will quote it with no obligation.

The A section V-belt is a power transmission element mounted on grooved pulleys to link motor and machine. DODGE is a brand that MR Accesorios Industriales supplies in Buenos Aires, Argentina. It is used in equipment where motion must be transmitted with good grip, vibration absorption and low maintenance. If you need a specific size, send the part number on WhatsApp and we will quote it.

The designation of these belts is read with the section letter and a number indicating the datum length. The A series groups the narrow-section belts: the examples A21, A22, A23, A24, A25, A26, A27 and A28 show how the final number changes with length. The higher that number, the longer the belt. To identify the one you need, simply read the code stamped on the old belt or measure the distance between pulley centers.

These belts are found in fans, centrifugal pumps, screw compressors, light conveyor belts and machine tools. In the Argentine market they appear in metalworking shops, food plants, industrial laundries and HVAC equipment. They are also used in the field, in mixers and augers. The A section is the most widespread for small and medium power, because it allows small-diameter pulleys without sacrificing service life.

To choose well, take into account the power to be transmitted, the motor rpm and the pulley diameter. The belt should be tight but not excessive: if it squeals or slips, check pulley alignment. Lubrication does not apply to the belt, but keeping the environment free of oil and chips does. If the equipment works in a dusty environment, consider a belt with a resistant cover. Installation is done without cutting tools, running the belt onto the pulley with tension released.

V-belts are interchangeable between brands if section and datum length match. An A21 belt from one brand can replace another A21 if the profile and length are equivalent. Do not mix different sections in the same set of pulleys. If you cannot find the exact part number, write to us on WhatsApp with the measurement or a photo of the old belt and we will indicate the compatible alternative. At MR Accesorios Industriales we quote shortly.

MR Accesorios Industriales supplies DODGE belts and other power transmission brands. If you need advice on choosing the section or length, send the part number on WhatsApp and we will reply shortly. We can also look at alternatives if the part number you are looking for does not appear in the listing.

The Dodge V-belt is a power transmission component used to link pulleys and transmit motion between shafts. Its V-shaped profile fits into the pulley grooves and allows loads to be driven in industrial equipment. MR Accesorios Industriales sells this Dodge belt line in Buenos Aires, Argentina, with more than 80 years of experience in the field. If you need a belt for your machine, send us the part number on WhatsApp and we'll quote it.

The designation of these Dodge belts reads as 5V followed by a four-digit number. The code 5V identifies the profile and section of the belt within the V-belt family. The number that follows, as in the examples 5V2120, 5V2240 or 5V2360, indicates the nominal length of the belt. The higher that value, the longer the belt. To choose the right size, have the complete part number shown on the original belt or in the machine manual at hand.

These belts are used in a wide variety of industrial applications in Argentina. They are found in fans, compressors, pumps, mills, conveyor belts and machine tools. They are also found in refrigeration equipment, extractors and air conditioning systems. In the agro-industrial field, they are used in seeders, harvesters and processing equipment. Their V-shaped profile allows power to be transmitted with good efficiency at moderate center distances. If your equipment requires a belt of this type, contact us on WhatsApp with the part number or measurements.

To select a V-belt, take into account the profile, the length and the number of belts working together. Check that the pulleys are aligned and in good condition, without wear in the grooves. Tension must be correct: if it is too loose, the belt slips; if it is too tight, the bearings are overloaded. Periodically check the condition of the belt and replace it if it shows cuts, cracks or wear. At MR Accesorios Industriales we advise you so you can choose the right belt for your application.

V-belts are manufactured under different standards and designations depending on the manufacturer. Cross-references between brands are common, but it is always best to verify the profile and length before replacing one belt with another. The 5V designation usually matches between different brands, although materials and tolerances may vary. If you need to replace a Dodge belt with another brand, send us the original part number and we'll tell you the compatible alternative. At MR Accesorios Industriales we sell Dodge belts and other power transmission brands.

If you are looking for a Dodge V-belt, write to us on WhatsApp with the part number 5V2120, 5V2240 or whichever you need. We'll quote you promptly and help you find the right belt for your equipment. You can also ask us about other sizes or belts from different brands and profiles. We are in Buenos Aires, Argentina, and we serve the whole country. Send us your inquiry and we'll reply promptly.

The DODGE HT500 series timing belt is a power transmission component that transmits motion between toothed pulleys without slipping. It is used in drives where synchronization between shafts is critical, such as in machine tools, packaging equipment, printing and industrial processes. Its toothed profile maintains a constant transmission ratio and absorbs variable loads. MR Accesorios Industriales supplies this line with technical advice to select the right belt for each application.

The designation of these belts combines a pitch number, the profile and the width. For example, 994-14MX-20 indicates a pitch of 994 mm, 14MX profile and a width of 20 mm. The code 1120-14MX-37 corresponds to a pitch of 1120 mm with the same profile and 37 mm width. The MX suffix identifies the toothed profile, and the final number defines the belt width. The HT500 series groups these references for synchronous transmission applications.

In Argentine industry, HT500 timing belts are used in packaging, printing, textile, machine tool and positioning system equipment. They are also present in pumps, compressors and conveyors where synchronism is required. MR Accesorios Industriales supplies them for replacement and new projects, backed by a company that has served the industrial market since 1945.

To correctly select a timing belt, take into account the pitch, profile and width required by the pulley. Check pulley alignment and proper tension to avoid premature wear. Lubrication does not apply to these belts, but temperature control and cleanliness of the environment do. If the application requires oil or high temperature resistance, ask about special variants.

DODGE HT500 timing belts can be interchanged with other brands that use the same profile and pitch, as with equivalent series on the market. The key is to respect the standardized dimensions: pitch, profile and width. To find the equivalent, simply identify those three data points on the original belt. MR Accesorios Industriales advises you so the replacement is compatible and safe.

If you need a DODGE HT500 timing belt, write to us on WhatsApp with the full part number or the pitch, profile and width measurements. We will quote you promptly and indicate the compatible alternative if needed. MR Accesorios Industriales, Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The Dodge L series timing belt is a power transmission component that transmits motion between toothed pulleys without slipping. Its toothed profile meshes with the pulley grooves, ensuring a constant, synchronized transmission ratio. It is used in equipment where rotation precision is critical, such as printers, machine tools, compressors and automation systems. MR Accesorios Industriales carries this line backed by more than 80 years in the industry.

The L series designation combines a number indicating the pitch length in tenths of an inch and a numeric suffix defining the belt width. For example, 124L050 corresponds to a belt with a 124-tenths-of-an-inch pitch and 0.50 inch width; 150L075 has a 150-tenths pitch and 0.75 inch width; 187L100 has a 187-tenths pitch and 1.00 inch width. The final suffix can be 050, 075 or 100 depending on the standard width.

In Argentine industry, L series timing belts are used in a wide variety of applications: from textile and packaging machines to printing equipment, robots and positioning systems. They are also found in screw compressors, metering pumps and machine tool drives where exact synchronization is required. Their profile allows high speeds with low noise and without the need for lubrication.

To correctly select an L series belt, take into account the number of teeth on the pulleys, the center distance and the power to be transmitted. It is essential to verify pulley alignment and proper tension: a belt that is too tight accelerates bearing wear, while low tension causes tooth jumping. Lubrication is not necessary, but it is advisable to keep the environment free of oils and contaminants that affect the rubber compound.

L series timing belts from different brands are usually interchangeable if the pitch, width and number of teeth match. However, differences in the compound and manufacturing process can affect service life. When requesting a quote, provide the complete code (for example, 124L050) and, if possible, the pulley brand to ensure compatibility. MR Accesorios Industriales will indicate the compatible alternative or manufacture it to measure if a special configuration is required.

To receive an accurate quote, send us on WhatsApp the code of the belt you need, the quantity and any additional application data. At MR Accesorios Industriales we will respond promptly with the best solution for your equipment.

The DODGE XL series timing belt is a power transmission element that works by engagement between its teeth and the pulley grooves, without slipping. It is used to synchronize movements and transmit force in equipment where the speed ratio must remain constant. MR Accesorios Industriales supplies it in Buenos Aires, Argentina, with over 80 years of experience in power transmission.

The designation of these belts combines a number that indicates the pitch length in tenths of an inch and the XL suffix, which identifies the series. For example, 60XL025 corresponds to a belt with 60 tenths of an inch pitch and 025 width; 70XL037 has 70 tenths of pitch and 037 width. Widths 025 and 037 are the most common in this series. If you need another combination, write to us with the full code.

XL series timing belts are found in transmission equipment that requires synchronization: machine tools, industrial printers, dosing equipment, light conveyors, packaging equipment and positioning systems. In Argentina they are used by metalworking shops, food plants, textile factories and the automotive sector. They are also present in laboratory equipment and precision machinery.

To select the right belt, consider the number of pulley teeth, the center distance and the power to be transmitted. Width 025 is for light loads and 037 for moderate loads. Verify that the pulleys are compatible with the XL pitch and that the tension is correct: a belt that is too tight wears the bearings and one that is too loose jumps teeth. Maintain alignment between pulleys and check wear periodically.

XL series timing belts from different brands are interchangeable if the pitch, length and width match. DODGE is a recognized brand in power transmission and MR Accesorios Industriales supplies it as part of its line. If your equipment uses an equivalent belt from another manufacturer, send us the code and we will indicate the compatible alternative.

To request a quote for your XL series timing belt, send the full code via WhatsApp to MR Accesorios Industriales. If you don't have it at hand, indicate the number of pulley teeth, the center distance and the width. We will reply shortly with the quote and the technical advice you need.