RINGSPANN Power transmission

Conical shaft-hub connections are fastening elements that transmit torque by radial tightening between a shaft and a hub, without the need for a key or additional machining. They are mounted in the annular space between both parts and, when actuated, generate uniform pressure that locks the connection. MR Accesorios Industriales offers the RINGSPANN line in Buenos Aires, Argentina, with technical advice to select the size according to each application's part number.

RINGSPANN shaft-hub locking assemblies are tapered clamping elements that allow mounting pulleys, gears, cams or any hub onto a shaft without a keyway. When the screws are tightened, the inner cone expands and generates uniform pressure that locks the assembly by friction. This simplifies the design, eliminates shaft weakening from a keyway and makes fine adjustment of the angular position easier. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to select the right model.

The shrink disc is a shaft-hub connection component that transmits torque by friction, without a keyway or backlash. It is mounted on the hub and, when its screws are tightened, compresses the hub against the shaft, creating a rigid and removable connection. It is used in power transmission, gearboxes, machine tools and equipment where high precision and reliability are required. MR Accesorios Industriales supplies the RINGSPANN line in Buenos Aires, Argentina.

The RINGSPANN metal bellows coupling is a power transmission element that joins two shafts and absorbs misalignments with no appreciable angular backlash. The steel bellows, instead of an elastomer, gives it torsional rigidity and makes it suitable for repeatable positioning movements. It is used in servomotors, encoders, spindles and mechanisms where coupling backlash would ruin precision. MR Accesorios Industriales supplies it in Buenos Aires, Argentina, with more than 80 years in the industrial sector.

The RINGSPANN REB DCO series pin and bushing coupling is a power transmission component that connects two shafts and transmits torque through pins and elastomeric bushings. It is used in equipment where misalignment must be absorbed and vibrations damped without losing transmission capacity. MR Accesorios Industriales carries this line in Buenos Aires, Argentina, and advises you on choosing the model for your application.

The RINGSPANN RWK EEO taper coupling is a power transmission component that rigidly connects two shafts by means of a taper mechanism. It is used when torque must be transmitted without backlash and with high concentricity, for example in machine tools, automation equipment or gearboxes. MR Accesorios Industriales carries this line in Buenos Aires, Argentina, and advises you on choosing the model according to shaft diameter and application.

RINGSPANN FGR series freewheels are power transmission components that allow rotation in one direction and lock movement in the opposite direction. They are used to prevent backstopping, control intermittent indexing or as a safety mechanism in industrial equipment. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the right configuration for each application.

RINGSPANN SF series freewheels are power transmission components that allow rotation in one direction and lock in the opposite direction. They are used as backstops, for intermittent indexing or as safety devices in machines. MR Accesorios Industriales supplies them in Buenos Aires, Argentina, with more than 80 years of experience in the field. If you need one, send us the part number via WhatsApp and we will quote you.

RINGSPANN BA series freewheels are power transmission components that allow rotation in one direction and lock movement in the opposite direction. They are used to prevent backstopping, control intermittent feeds or couple shafts depending on the direction of rotation. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the right model for your application.

RINGSPANN precision clamping systems are components designed to secure and center elements in power transmission applications. They are used to secure discs, gears, pulleys or other components onto shafts, ensuring reliable torque transmission and precise alignment. MR Accesorios Industriales sells these solutions as exclusive representative in Argentina, providing technical advice to select the right system for the application.

RINGSPANN precision locking elements are components designed to secure and center parts in power transmission systems. They are used to secure hubs, gears, pulleys and other elements on shafts, guaranteeing a firm and precise connection without the need for additional machining. Their design allows transmitting high torques and withstanding radial and axial loads, which makes them ideal for demanding industrial applications. MR Accesorios Industriales supplies these elements as exclusive representative of RINGSPANN in Argentina.

The RINGSPANN thrust ring is a precision component used in clamping systems to transmit axial forces and ensure safe support in demanding assemblies. Its design allows it to be integrated into assemblies that require dimensional control and repeatability, such as in machine tools, automation equipment and clamping devices. MR Accesorios Industriales sells this line as exclusive representative in Argentina, with technical advice to select the right part number for the application.

RINGSPANN torque limiters are safety components for power transmissions: they interrupt or limit torque when an overload exceeds the set value, thus protecting motors, gearboxes, shafts and machines. MR Accesorios Industriales supplies them in Buenos Aires, Argentina, as exclusive representative of the brand. They are used in production lines, conveyors, mixers and equipment where a blockage or sudden start can damage the mechanics. To request a quote, send the full part number via WhatsApp.

RINGSPANN RT series torque limiters are safety components for mechanical drives. They are installed between the motor and the load to disengage the motion when torque exceeds a set value, preventing damage to gears, shafts, chains or couplings. They are Belleville spring-actuated devices that, under overload, slip or disengage and can be reset. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical support to select the right model.

The RINGSPANN RS series torque limiter is a safety component for power transmissions. It is installed between the motor and the load to interrupt transmission when torque exceeds a set value, preventing damage to gears, shafts, couplings or structures. The RS series covers different capacities and configurations, identified by numbers and suffixes that indicate size and mounting variant. MR Accesorios Industriales supplies this line in Argentina with technical advice to select the right model.

RINGSPANN remote control accessories are components that allow power transmission systems, such as clutches, brakes or valves, to be operated remotely from a safe or hard-to-reach position. They integrate into RCS systems and facilitate remote control in industrial equipment. MR Accesorios Industriales supplies these accessories in Buenos Aires, Argentina, and advises you so you can select the correct part number for your application.

RINGSPANN control cables are remote mechanical transmission components that allow a mechanism to be operated from a distance: they transmit motion and force between a control and the receiving element along a flexible path. They are used in RCS remote control systems and their connection accessories, where the cable is the link between the lever or actuator and the final mechanism. MR Accesorios Industriales supplies them in Buenos Aires, Argentina.

RINGSPANN brake lever systems are remote control components that allow brakes to be actuated manually and safely from a distant position. They are used in machines and equipment where the brake is in a hard-to-reach place or where a comfortable control is needed for the operator. MR Accesorios Industriales supplies these systems in Argentina with technical advice to choose the right variant for the application.

RINGSPANN CSF cardan shafts are power transmission components that transmit motion between misaligned shafts, with variable misalignment angles. They are used in a wide variety of industrial machines, from conveyors to process equipment, where flexibility and robustness are key. MR Accesorios Industriales sells this line as exclusive representative in Argentina, with technical advice to choose the right size.

The RINGSPANN CSL cardan shaft is a power transmission component designed to connect shafts and transmit torque between shafts that are not perfectly aligned. It is used in industrial drives where there is angular misalignment or radial displacement, and it allows continuous rotation at high torques. MR Accesorios Industriales supplies this line in Argentina as exclusive representative of the brand. If you need to select a size, send us the part number on WhatsApp and we'll advise you.

The RINGSPANN CSS drive shaft is a power transmission component designed to connect misaligned shafts and transmit torque at variable working angles. It is used in drives where the equipment layout requires an articulated joint that follows the movement without losing rotational capacity. MR Accesorios Industriales sells this line in Argentina as exclusive representative of RINGSPANN, with technical advice to choose the right size for the application.

The brake disc is the rotating component that the pads or calipers of an industrial brake act on to stop or control the speed of a shaft. RINGSPANN offers discs in different sizes, identified by their diameter in millimeters, which are selected according to the equipment and the energy to be dissipated. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you so you choose the right disc for your application.

The RINGSPANN KE FHK locking unit is an industrial braking component that is mounted on shafts and used to hold loads or generate braking in machines. It is part of the RINGSPANN industrial brakes line, exclusive representative in Argentina. It is used in applications requiring safe and repeatable locking, such as presses, machine tools or lifting systems. MR Accesorios Industriales supplies this series with technical advice to select the right model.

The RINGSPANN KE FPK series industrial brake is a clamping unit mounted on transmission shafts to immobilize or position loads with precision. It is used in applications where motion must be stopped in a controlled way, such as machine tools, lifting equipment or production lines. Its compact design allows it to be integrated into tight spaces, and its pneumatic or hydraulic actuation depending on the model makes it suitable for repetitive cycles.