TIMKEN Bearings

The Timken TS series cone is the inner component of a tapered roller bearing: it combines the inner raceway, the cage and the rollers. It is matched with a cup of the same series to form the complete assembly. It is used in applications with combined radial and axial loads, and where rigidity and load capacity are required. MR Accesorios Industriales supplies this line as a brand in Buenos Aires, Argentina.

The designation of these cones is read from the catalog number: for example, 00050, 247, 334, 335, 336, 339, 342 or 343. Each part number identifies a specific cone geometry, and the TS or TSF series indicates the assembly type and its mounting system. The TS suffix corresponds to the standard version; TSF, to a variant with particular sealing or fixing characteristics. To select the assembly, the cone must be matched with the corresponding cup of the same series number.

These cones are used in equipment where tapered roller bearings are the usual choice: gearboxes, drive shafts, road machinery, earthmoving equipment, pumps, fans and conveyors. In Argentine industry they appear in maintenance of food plants, cement plants, steel mills, oilseed plants and in the agro-industrial sector, especially in seeders and combine harvesters. Also in heavy machinery repair shops and in equipment manufacturers that assemble their own assemblies.

To choose correctly, take into account the cone-cup combination: the series number must match to ensure correct roller contact. Mounting is done with an interference fit on the cone and a sliding fit on the cup, depending on the type of load. Lubrication and sealing are key: without a suitable seal, dust or water contaminate the raceway and shorten service life. Shaft alignment and axial clearance also influence performance. If you need guidance, send us the part number and we will indicate the compatible alternative.

Regarding equivalences, tapered roller bearings are identified by numbering systems that can vary between manufacturers. The same size can have different designations depending on the brand, and they are not always interchangeable without verifying dimensions and tolerances. Therefore, the safest option is to request a quote using the complete cone and cup part number. MR Accesorios Industriales advises you to find the combination that best suits your equipment, whether with the Timken brand or another compatible alternative.

If you have the cone part number or the bearing model you need, write to us on WhatsApp. We will quote you promptly and indicate the best solution for your application. We can also help you identify the complete assembly if you send us the dimensions or the series number.

The TIMKEN TS series tapered roller bearing cup is the removable outer ring of a tapered bearing. It is press-fitted into the housing and forms the raceway for the rollers and the cone. It is used in applications that combine radial and axial loads, such as gearboxes, wheel axles, agricultural machinery and transmission equipment. MR Accesorios Industriales supplies this line backed by more than 80 years in the industry.

The designation of TIMKEN TS series cups is expressed with a three- or four-digit number, such as 00150, 242, 332, 352, 362, 363, 372 or 374. Each part number identifies a cup with standardized dimensions of outer diameter, width and raceway angle. In the TS series, the cup is combined with a specific cone to form the complete bearing. That is why, when requesting a quote, it is important to indicate the cup part number and, if known, that of the associated cone.

These cups are used in industries in Argentina such as food, cement, mining and metalworking. They are found in speed reducers, conveyors, mills, presses, pumping equipment and agricultural machinery. They are also found in the automotive and railway sectors. Their design withstands combined loads and slight misalignments, which makes them suitable for demanding environments with vibrations and varying temperatures.

To select a TIMKEN TS series cup, take into account the outer diameter and width required by the housing, and that the cup must be mounted with a suitable interference fit. Lubrication and sealing are key: choose the lubricant according to the speed and working temperature, and ensure an oil or grease film that protects the raceways. Alignment between cone and cup prevents point loads. During mounting, use suitable tools and avoid striking the raceway.

TIMKEN TS series tapered roller bearing cups can be interchanged with those of other brands that follow the same standardized dimensions, such as SKF, FAG, NSK or NTN, as long as the outer diameter, width and raceway angle match. Interchangeability does not depend only on the part number, but on the combination with the cone. That is why, before replacing a cup, check that the cone-cup assembly maintains the tolerances and axial clearance recommended by the equipment manufacturer.

If you need a TIMKEN TS series tapered roller bearing cup, write to us by WhatsApp with the part number shown on the part or on the drawing. At MR Accesorios Industriales we will quote it shortly and tell you the compatible alternative if needed. We can also advise you on the corresponding cone and the mounting precautions so that the bearing works with the maximum service life.

Timken tapered roller bearings are components designed to support combined radial and axial loads, with a high load capacity relative to their size. They are used in applications where motion must be transmitted with precision and rigidity, such as gearboxes, wheel axles, spindles and industrial machinery. MR Accesorios Industriales sells this line as a brand, with more than 80 years of experience in the Argentine market.

The designation of Timken tapered roller bearings is based on a series of numbers that indicate the size and geometry of the assembly. For example, the 30203, 30204, 30205 and 30206 series corresponds to single-row bearings with a contact angle and standardized dimensions. The suffixes, when they appear, provide information about the internal design, sealing or mounting. To correctly interpret each code, it is essential to consult the complete coding that Timken assigns to each reference.

These bearings are used in a wide variety of industries in Argentina: from the manufacture of agricultural machinery and road equipment to the food, cement and metallurgical industries. They are also present in the automotive sector, in wheel hubs and differentials, and in railway applications. Their ability to support combined loads and their rigidity make them suitable for demanding environments, with high requirements for precision and durability.

To select a tapered roller bearing, you must consider the radial and axial load, the rotation speed, the lubrication and the type of sealing. Mounting requires careful alignment and adequate axial adjustment, since these bearings are sensitive to poor installation. Lubrication can be with grease or oil, depending on the application, and the sealing protects against contamination and lubricant loss. It is advisable to follow the manufacturer's instructions for mounting and commissioning.

Regarding equivalences and interchangeability, Timken tapered roller bearings can be replaced by products from other brands that follow the same standardized dimensions and tolerances. However, it is important to verify the technical specifications and the quality of the materials, since not all brands offer the same performance. To ensure correct compatibility, it is advisable to consult a specialist who can evaluate the specific application.

If you need a Timken tapered roller bearing, write to us on WhatsApp with the code or model you require. At MR Accesorios Industriales we will quote it and indicate the compatible alternative if necessary. With more than 80 years of experience, we are here to advise you on the selection and mounting of these components.

The Timken EJ series spherical roller bearing is a component designed to withstand radial and axial loads in applications where alignment between shaft and housing is not perfect. Its double-row roller design compensates for angular misalignment, making it ideal for equipment subject to flexing or mounting misalignment. It is used in industrial machinery, conveyors, mills and process equipment. MR Accesorios Industriales supplies this series backed by more than 80 years in the Argentine market.

The EJ series designation in Timken bearings consists of a base number indicating size and load capacity, followed by the EJ suffix identifying specific design features such as cage type and internal design. For example, models 21305EJ, 21306EJ and 21307EJ share the suffix but vary in dimensions. Knowing the complete code is key to selecting the correct bearing for the application.

These bearings are used in industries such as cement, mining, steel, paper and food, in equipment such as conveyor belts, mills, crushers, industrial fans and continuous process machines. In Argentina, they are common in production plants and maintenance workshops requiring robust components for severe load and contamination conditions.

To select the right bearing, consider radial and axial load, operating speed and the working environment. Sealing and lubrication are critical: choose the seal type according to exposure to dust or moisture, and ensure adequate lubrication to extend service life. Correct alignment during mounting prevents additional stresses and premature failures.

Spherical roller bearings from different brands may be interchangeable if dimensions and load capacity match. Timken is a recognized brand, and at MR Accesorios Industriales we advise you to find the right equivalent for your equipment. Always verify the technical specifications before replacing one bearing with another from a different manufacturer.

If you need a quote for a Timken EJ series bearing, write to us on WhatsApp with the complete code or the dimensions of your equipment. At MR Accesorios Industriales we will quote you promptly and indicate the compatible alternative if necessary. More than 80 years of experience back us as an industrial supplier in Buenos Aires, Argentina.

TIMKEN spherical roller bearings are components designed to withstand high radial loads and also axial loads in both directions, with self-aligning capability. Their design with two rows of rollers on a spherical outer raceway compensates for misalignment between shaft and housing, making them suitable for equipment with flexing or difficult mounting. They are used in heavy machinery, mills, conveyor belts and gearboxes. At MR Accesorios Industriales we quote them on WhatsApp with your part number or size.

The designation of this series combines a size number with the suffix YMB, which identifies the machined brass window cage, roller-guided, characteristic of Timken spherical roller bearings. Examples such as 230/500YMB or 230/600YMB show first the 230 dimension series and then the bore diameter in millimeters (500, 600, etc.). The suffix YMB does not change the external dimensions, but it does change the internal construction and load capacity. Learn more about this nomenclature by consulting each case on WhatsApp.

In Argentine industry, these bearings are used in applications with combined loads and possible misalignment: cement and mining mills, crushers, high-capacity conveyor belts, speed reducers, paper machines and steelmaking equipment. They also appear in large industrial fans and overhead cranes. Their ability to withstand radial and axial loads makes them versatile in continuous process plants, where reliability is key.

To correctly select a spherical roller bearing, take into account the radial and axial load, the rotational speed, the lubrication and the type of sealing. During mounting, careful initial alignment and a proper fit on the shaft and housing are essential. Lubrication can be grease or oil, depending on the application and the thermal regime. The YMB brass cage offers good strength and guidance, although compatibility with the chosen lubricant must be verified.

When replacing a spherical roller bearing, it is common to find equivalents between different brands. Although the main dimensions usually match according to standards, the internal suffixes may vary. Therefore, it is always advisable to compare the complete designation and the service conditions. At MR Accesorios Industriales we advise you to find the alternative suitable for your equipment, maintaining the original performance.

If you need a TIMKEN spherical roller bearing from this series, write to us on WhatsApp with the part number or size you are looking for. At MR Accesorios Industriales we will quote it promptly and indicate the best option for your application. We can also advise you on mounting and lubrication to extend the service life of the component.

TIMKEN EM series spherical roller bearings are components designed to withstand high radial loads and angular misalignment between shaft and housing. Their double-row roller design and spherical outer raceway allow them to adapt to shaft deflection without losing load capacity. They are used in equipment subject to vibration, shock or assemblies where perfect alignment is not guaranteed. MR Accesorios Industriales supplies this line as a brand in Buenos Aires, Argentina.

The EM series designation consists of a basic five-digit number that indicates size and load capacity, followed by the EM suffix. For example, 22206EM, 22208EM and 22212EM correspond to spherical roller bearings with different dimensions. The EM suffix identifies a machined brass cage design, suitable for demanding applications. Numbers in the 222 series indicate medium-section spherical roller bearings, while other series such as 223 have higher capacity. To choose the correct part number, it is essential to know the shaft diameter, the load and the operating conditions.

These bearings are used in a wide variety of industries in Argentina, such as metallurgy, cement, mining, paper and food processing. They are found in equipment such as conveyor belts, mills, crushers, vibrating screens, industrial fans and paper machines. Their ability to withstand misalignment makes them ideal for assemblies where shafts may deflect or where supports are not perfectly aligned. They are also used in applications with combined radial and axial loads, although their main strength is radial load.

To select the right bearing, take into account the radial and axial load it must withstand, the rotation speed, the type of lubrication and the environmental conditions. The EM suffix indicates a machined brass cage, which offers greater strength and heat dissipation than stamped steel cages. It is important to verify the correct internal clearance for the application; excessive clearance can cause vibration and insufficient clearance can cause overheating. During mounting, ensure correct alignment and use suitable tools to avoid damage to the rollers and raceways. Lubrication must be the one recommended by the manufacturer and must be kept clean.

As for equivalences and interchangeability, spherical roller bearings from different brands can be interchanged if they share the same dimensions and basic designation. For example, a 22206EM bearing from another brand can replace the TIMKEN one if tolerances and internal clearance are equivalent. However, it is advisable to verify the technical specifications of each manufacturer, since there may be differences in load capacity, cage or heat treatment. MR Accesorios Industriales can advise you on the compatible alternative for your equipment.

If you need a TIMKEN EM series spherical roller bearing, message us on WhatsApp with the part number or the dimensions you require. At MR Accesorios Industriales we will quote it promptly and indicate the compatible alternative if necessary. With more than 80 years of experience in the Argentine market, since 1945, we are your partner for quality industrial components.

The deep groove ball bearing is an essential component in power transmission and rotary motion. Its design with a single row of balls between two rings allows it to support radial and axial loads in both directions, with low friction and high speed. It is used in a wide variety of industrial equipment, from electric motors to pumps and fans. MR Accesorios Industriales supplies the Timken brand, recognized for its quality and reliability in the market.

The designation of these bearings follows a nomenclature that combines numbers and letters. For example, the 600 series is identified with three-digit codes such as 603, 604, 605, which indicate progressive dimensions. The 6000 series uses four digits, such as 6000, 6001, and so on. There are also series such as 16000 and 61000, which correspond to thin-section designs or specific applications. The suffixes, when they appear, indicate characteristics such as sealing (2RS), shielding (ZZ) or internal clearance (C3), among others. Knowing these codes makes correct selection easier.

In Argentine industry, Timken deep groove ball bearings are used in a great diversity of sectors. They are found in electric motors, centrifugal pumps, compressors, fans, conveyors and machine tools. They are also found in agricultural, food and textile equipment. Their ability to operate at high speeds and support combined loads makes them versatile. MR Accesorios Industriales, with more than 80 years in the market, supplies these sectors with bearing solutions from leading brands.

To select the right bearing, it is essential to consider the radial and axial load, the rotation speed and the environmental conditions. Sealing protects against contaminants and retains lubricant; shielded bearings are suitable for clean environments, while sealed ones offer greater protection. Internal clearance should be chosen according to the operating temperature and the fit. Correct alignment and lubrication extend service life. During mounting, it is recommended to follow cleanliness practices and use suitable tools to avoid damage.

Deep groove ball bearings are interchangeable between manufacturers that follow the same standardized dimensions. When looking for a replacement, it is important to verify the complete code, including suffixes, to ensure compatibility. Brands such as SKF, NSK, FAG and Timken offer equivalent products under their own nomenclatures. MR Accesorios Industriales can advise you on identifying the correct reference and offer alternatives when necessary. Interchangeability makes maintenance easier and reduces downtime.

If you need a quote for Timken deep groove ball bearings, message us on WhatsApp with the part number or the dimensions you require. At MR Accesorios Industriales we respond shortly and help you find the right solution for your application. We can also advise you on selection, mounting and equivalences with other brands. Don't hesitate to contact us for a personalized quote.

The TIMKEN MB series deep groove ball bearing is a component of the 6000 family, designed to carry radial and axial loads in both directions. It is used in equipment where precision and reliability are critical, such as electric motors, pumps and gearboxes. Its machined bronze cage construction makes it suitable for demanding applications. MR Accesorios Industriales sells this line backed by more than 80 years in the Argentine industrial market.

The designation of these bearings follows the 6000 series nomenclature. The base number indicates the size: for example, 6015MB corresponds to a bearing of the 60 series with a 75 mm bore, while 6040MB has a 200 mm bore. The MB suffix indicates that the cage is machined bronze, ball-centered. This feature improves resistance to high temperatures and vibration. Knowing the complete part number is essential to select the correct replacement.

In Argentine industry, these bearings are found in large electric motors, centrifugal pumps, industrial fans and gearboxes. They also appear in mining equipment, cement plants and water treatment plants. Their ability to run at high speeds and carry combined loads makes them versatile. MR Accesorios Industriales sells them throughout the country, with technical advice to choose the right variant.

To select the correct bearing, take into account the radial and axial load, the rotational speed and the environmental conditions. The MB bronze cage is ideal when there are high temperatures or significant dynamic stresses. Check the alignment between shaft and housing, and ensure proper lubrication: grease for slow applications or oil when heat dissipation is required. Correct fit mounting prevents premature failures and extends service life.

6000 series deep groove ball bearings with the MB suffix can be interchanged with equivalent products from other brands that follow the same dimensional nomenclature. When requesting a quote, it is important to state the complete part number and, if possible, the main dimensions. MR Accesorios Industriales advises you on compatibility. Not all cages are the same: the bronze one offers advantages in severe applications.

If you need a TIMKEN MB series deep groove ball bearing, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we will quote it promptly and indicate the compatible alternative if needed. With more than 80 years of experience, we support Argentine industry with quality products and personalized service.

The TIMKEN 618 MA series deep groove ball bearing is a precision component designed to support radial and axial loads in both directions. Its single-row ball construction and machined brass cage give it high rigidity and smooth rotation, ideal for applications requiring accuracy and low friction. It is used in industrial machinery, power transmission equipment and assemblies that demand reliability and long service life.

The 618 MA series designation is interpreted as follows: the 618 prefix corresponds to the thin-section deep groove ball bearing series, while the MA suffix indicates a machined brass cage, ball-centered. Examples such as 618/500MA, 618/530MA and 618/600MA show that the number after the slash indicates the bore diameter in millimeters. This nomenclature allows quick identification of the bearing's size and construction features.

In Argentine industry, these bearings are used in a wide variety of applications: from machine tools and precision equipment to conveyors, pumps and industrial fans. Their ability to operate at high speeds and support combined loads makes them suitable for electric motors, gearboxes and power transmission systems. They are also used in the food, chemical and petrochemical sectors, where reliability is critical.

To correctly select a bearing from this series, it is essential to consider the radial and axial load it will support, as well as the rotation speed and environmental conditions. Mounting requires precise alignment between shaft and housing, and adequate lubrication according to the application type. The machined brass cage offers excellent temperature resistance and allows high speeds. It is recommended to verify internal clearance and sealing according to the working environment.

Regarding equivalents and interchangeability, deep groove ball bearings of similar series from other manufacturers may have standardized dimensions that allow replacement, provided tolerances and cage type are verified. It is important to consult the technical specifications of each brand to ensure compatibility. MR Accesorios Industriales can advise you on the right alternative for your application.

If you need a quote for a TIMKEN 618 MA series deep groove ball bearing or a specific variant, write to us on WhatsApp with the part number or model you require. At MR Accesorios Industriales we provide personalized service and will send you a quote promptly. We can also indicate the compatible alternative that best suits your equipment.

TIMKEN 7200 B series angular contact ball bearings are components designed to withstand combined loads, that is, radial and axial forces acting on the shaft at the same time. They are used in applications where precision and axial load capacity are critical, such as machine tool spindles, pumps, compressors and gearboxes. Their angular contact raceway design allows optimal load distribution among the rolling elements, resulting in reliable performance and longer service life of the assembly. At MR Accesorios Industriales we sell them as part of our bearing line for industry.

The 7200 B series designation is read as follows: the first digits indicate the bearing type and its dimension series. In this case, the prefix 72 corresponds to angular contact ball bearings of the 7200 series, which is characterized by a 40° contact angle. The suffix B indicates that the bearing has a 40° contact angle design and a cage made of a specific material. Examples such as 7200 B, 7201 B, 7202 B, 7203 B, 7204 B, 7205 B, 7206 B and 7207 B show how the bore size varies: the higher the number, the larger the bore diameter. This nomenclature makes it possible to quickly identify the main dimensions and characteristics of the bearing.

These bearings are used in a wide variety of industrial applications in Argentina. They are found in machine tool spindles, where precision and rigidity are essential; in centrifugal and positive displacement pumps, which must withstand axial loads; in screw and reciprocating compressors; in gearboxes and gear cases; and in high-demand electric motors. They are also present in power transmission equipment, such as industrial fans and conveyors. Their ability to handle combined loads makes them suitable for assemblies where the shaft must remain stable under different operating conditions.

To correctly select a TIMKEN 7200 B series angular contact bearing, it is essential to consider the magnitude and direction of the loads, the rotation speed and the environmental conditions. Mounting must be carried out with precise alignment, since these bearings are sensitive to alignment errors. They are generally mounted in pairs, arranged in back-to-back, face-to-face or tandem configuration, to achieve the proper preload and distribute the loads. Lubrication can be with grease or oil, depending on the application, and keeping the bearing clean is crucial to avoid contamination. Sealing or additional protection will depend on the environment; in dusty or humid environments, bearings with seals or shields are recommended.

As for equivalents and interchangeability, TIMKEN 7200 B series angular contact bearings can be replaced by products from other brands that follow the same international nomenclature, such as SKF, FAG, NSK or NTN, as long as the dimensions and contact angle match. It is important to check the tolerances and internal clearance, as they may vary between manufacturers. For a safe replacement, it is advisable to consult a specialist and provide the full part number of the original bearing. At MR Accesorios Industriales we can advise you on the best available alternative.

If you need a quote for TIMKEN 7200 B series angular contact bearings, write to us on WhatsApp with the part number or the size you require. We will reply shortly with the quote. We can also advise you on selection and mounting so that your equipment runs optimally.

TIMKEN 3200-3300 series angular contact ball bearings are components designed to support combined radial and axial loads in a single direction. Their contact angle design enables applications requiring high precision and rigidity, such as machine tool spindles, pumps and gearboxes. MR Accesorios Industriales supplies this line backed by more than 80 years in the Argentine industrial market.

The designation of this series is read with the four-digit basic number that identifies the size and the suffix A that indicates a construction variant within the family. For example, 3201 A, 3202 A and 3203 A correspond to the smallest sizes, while 3207 A and 3208 A are the largest in the series. The suffix A usually indicates a modification in the contact angle or in the cage, according to the manufacturer's standard. To choose the correct part number, take into account the housing dimensions and the load direction.

These bearings are used in industries such as metalworking, food and petrochemical, in equipment such as centrifugal pumps, compressors, high-speed fans and milling machine spindles. In Argentina, they are common in machine tool maintenance and in production lines requiring precision. Their ability to support axial loads in one direction makes them ideal for applications with constant thrust, such as helical gears or worm screws.

To select the right bearing, consider the magnitude and direction of the loads, the rotation speed and the environmental conditions. Mounting must ensure precise alignment between shaft and housing, since these bearings are sensitive to misalignment. Lubrication can be grease or oil, depending on the speed and working temperature. Sealing will depend on external contamination: in dirty environments, additional protection is recommended. Internal clearance is adjusted by preload or axial clearance, depending on the equipment design.

Regarding equivalences, TIMKEN 3200-3300 series angular contact bearings can be interchanged with products from other brands that follow the same dimensional and angle nomenclature. It is essential to verify tolerances and contact angle, since small differences can affect performance. For safe interchangeability, always compare technical specifications and consult with our technical team. Not all brands maintain exactly the same load capacities.

If you need a bearing from this series, write to us on WhatsApp with the part number or the dimensions you require. At MR Accesorios Industriales we will quote you promptly and indicate the compatible alternative if necessary. We can also advise you on mounting and the right lubrication for your application. With more than 80 years of experience, we are your reliable partner in bearings and power transmission.